Topics created by natty15d

@OwenD Thankyou 🙂
Between the link you sent and this post i think i have it now.
https://forum.duet3d.com/topic/31256/filament-runout-script-doesn-t-work

@fcwilt That's perfect thankyou again

Thats great i'll give that a try, just asnt sure if there was an order in the code that meant it had to be a specific place 🙂

Pressure advance usually results in requiring less retraction distance.

@fcwilt looks like you solved it!
Reduced print temp down to 195 and just had a fantastic print. Retried the fast print and the result was just as good. The ramps board must have been giving false temperature readings as it needed 215 to print PLA.
Thank you so much for everyones help and assistance 16063372699657176508103457256290.jpg