Topics created by noblebran

@phaedrux said in ADDING SCRIPT TO HAVE Z-PROBE 'PROBE' BED TO 0 BEFORE PRINTS.:

https://duet3d.dozuki.com/Wiki/Calibrating_a_delta_printer

Thank you 🙂

@phaedrux Who knows, but thank you very much!

@phaedrux

@phaedrux said in PID Tuning:

@noblebran said in PID Tuning:

type k thermistor.

Do you mean type k thermocouple?

@noblebran said in PID Tuning:

The cartridge is 12v also, not sure if that matters.

M307 H1 B0 R3.539 C260.4 D14.22 S1.00 V23.1

Yikes, yes it does. It looks like you're running a 12v heater at 24v. Hence the insanely fast heat up. DO NOT DO THIS. Replace the heater with 24v immediately and don't use it until you do.

Can't believe I overlooked that!

@fcwilt said in Start / Stop S3D SCRIPT / G-CODE:

@noblebran said in Start / Stop S3D SCRIPT / G-CODE:

@phaedrux @fcwilt

Thank you both!

Glad to help in anyway we can.

And if we cannot help we will try our best not to mess things up too badly. 😉

Frederick

ha ha thats all I can ask for!

Now it is just fine tuning...

@phaedrux Yes - thank you!!