I already said I will provide a more detailed explanation when I have the time. Please stop pestering me about it now.
Controversial posts made by oliof
-
RE: Stop Firmware Retract and Pressure Advance from Fighting
-
RE: how to setup a hotend for directly printing metal and ceramic.
@lynnmt you really should be updating to 3.4.6 at least (I also would suggest leaving out the SBC which has no benefit for your current use).
-
RE: Terrible print
my money is on the bowden gap issue with the terrible pneumatic push fits on an ender, and that the switch to the board is incidental. See https://www.youtube.com/watch?v=30qqKUwviww
-
RE: Skew calibration with calibration square? Maths help needed
@droftarts I just meant to use the feature that allows you to give macros an unused gcode name and then calling that, without changes to the firmware (-;
-
RE: Stop Firmware Retract and Pressure Advance from Fighting
@dragonn I don't have issues with clogging or my all metal hotend's retraction settings. While what you write is an interesting observation, it does not add to my issue here.