@jay_s_uk I finally got it through bossa. Weird that it wouldn't take the firmware any other way. Thanks for the help!
Best posts made by Phantom329
-
RE: Firmware installs but doesn't updateposted in Firmware installation
-
RE: How to change bed heater fault parameters?posted in Tuning and tweaking
@Phaedrux I tried changing the Hz from 1 to 1000 but no difference at all. I took a better video and also noted that the bed actually vibrates. It starts at around 55C and sometimes momentarily stops when above 60C (set at 60C) but immediately stops when I turn off the bed heat.
https://drive.google.com/file/d/1k6DX-6bAaiALDYou7UZGFRZKjEFxABVc/view?usp=sharing -
RE: Bad printing quality for unknown reasonposted in Tuning and tweaking
@brotherchris Nope, I have the extruder and material set to 1.75mm.