@droftarts Hey thanks a bunch I'll swap it over when I get home and be WAY more careful with this one.
Latest posts made by Redheadrambo
-
RE: Smoked y driver on Duet 2 wifi after swapping out a motor.
-
RE: Smoked y driver on Duet 2 wifi after swapping out a motor.
@dc42 Damn. Can I use the E1 driver for the y-axis then?
-
RE: Smoked y driver on Duet 2 wifi after swapping out a motor.
Nope. Turned of power before pulling wires.
-
Smoked y driver on Duet 2 wifi after swapping out a motor.
So I was having trouble with y-axis losing steps here and there so I upped the current to 900mA. Worked for a while but I decided to replace the motor with a slightly larger nema 17 that I had laying around. The new motor just vibrated so I figured I had the wires in the wrong order(they were). Fixed them and it still did the same thing and there was a grounding error on screen. Next I put a motor I know was good on the y driver. Smoke. Panic. Kill power.
Now what do I do?