@Phaedrux
: )
i got what i wanted it to do in the end
GPT
@Phaedrux
: )
i got what i wanted it to do in the end
GPT
to help you configure your duet .. which is great !
@jay_s_uk thanks jay ill give that a go
I've tried some of the variables with no change . I've been reading the docs to try and figure it out for hours but its beyond my knowledge base
But thank you for any help for this noobie
@jens55
thanks for your help , if i have any more problems ill do my best to read the duet docs
@Richard-F
ok i re-formatted copied files back on .. eveything seem ok no error msgs
@Richard-F
ok im doing a override format and try and figure it out myself
is it safe to delete these files .. thanks
ive no idea if its safe to delete the bin files
im just setting up a 3 axis
no add-ons no sbc , just 3 steppers
I'm using the sd card that came with the mini 5 + wifi
all I've done is update firmware, and added config file. i looked at the card and in boot volume there's about 200mb free
the other Partitions are empty
its a new board and first setup
any help i would be grateful
Feel free to use modify.
Just me messing around, I need to get out more, lol
I tried to upload the fusion file, but chat here does not support f3d.
But i added the stl if anyone wants it