Topics created by skezo

@skezo tracking this github issue here:
https://github.com/Duet3D/RepRapFirmware/issues/437

can you confirm its fixed in 3.5.0beta3?

michele-bertoni created this issue in Duet3D/RepRapFirmware closed Abort command in load.g or unload.g filament macros changes filament, as it was correctly loaded/unloaded #437

@Rushmere3D @droftarts @achrn

Just wanted to close off this thread. Thanks for all the help and suggestions. I ended up using a Revo Voron + Orbiter v2 and modified Mini-AfterSherpa toolhead. In its current setup it has reduced my print volume slightly but will modify more if I find i need more print area.

It is still a bit of mess re:wires but seems to print well.

image.jpg

@dc42 @T3P3Tony

Awesome, thanks for this information. I have managed to interface with the 4 free pins on the maestro.

I was able to get the first layer test to print full squares by reducing retraction speed (15mm/sec), retraction distance (0.5mm), layer-height (0.2mm), extrusion width (0.48mm) and increasing travel moves (260mm/sec) and pressure advance (0.7). This also helped with printing the single parameter geometries.

I think I still have a while to go to dialing this in but I will take it as progress. Thanks for all the help.

IMG_20200824_084321.jpg

Perhaps give this calibration method a try.

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40

What is the filament path like? Does the filament feed smoothly or is there friction and resistance?