@phaedrux So I've used 3 different laptops and endless cables now sadly still doesn't work, I followed the instructions on erasing it.

@droftarts Here is a picture,

@droftarts Just tried all this still nothing, The 3.3 and 5v lights come on but nothing else is working. I bought it couple of months ago from E3D.

@phaedrux Already done all this still doesn't work

@o_lampe Did a Erase, Nothing is showing up on device manager on both laptops. And the SD card I swapped out for another and still isn't working.

Afternoon, So I came to turn the printer on today and the screen was stuck on connecting, I took the SD card out to find it wasn't reading on the laptop changed laptops still not working. Did a reset to redo the firmware and it's not showing up on Bossa or YAT on both laptops all lights are on but nothing is coming through I've changed the wires and laptops and still nothing is coming through? any ideas.

@phaedrux Was also meant to add there is no light on it anymore can't see the backlight on. Not good considering I just bought it

@phaedrux So I did a firmware reload and now it's full dead but before it would flicker on the boot and make to click noise for each tab but it's not even doing that anymore?

Afternoon,

I'm having issues with my screen it will power up but will not show the display like normal it is a brand new screen powered into a duet wifi board. The screen was working perfectly fine this morning and on reboot it just stopped but the weird thing is I can touch the screen where the buttoms would be but it wont show on the screen its just black. I have reflashed the firmware and still isn't showing up sadly. I have ordered from E3D abotu a month ago ish.

Thanks