Posts made by tmicke

-Sorry if this gets double posted, my first try didn't seem to work..

As the title says..

Please see my config file, I have tried a few things that I've red here but none seems to make it more quiet, sorry but can't recall exactly what I did try.

I rebuilt a Monoprice mini with a V6 hotend and fitted an 8*8 leadscrew and runs it with a Mini 5+.
X and Y motors are the original ones and those are really quiet, for the extruder I bought this one: https://www.bondtech.se/product/nema17-pancake-stepper-22mm/
And for my Z: https://www.bondtech.se/product/nema17-pancake-stepper-25mm/

They seem to be very much alike to my ignorant eye and they both make a sound that reminds of the belt-fan in your car when it starts to slip but with a pulsating pitch.

I did try with a motor from the extruder from my Prusa (on my Z axis) and that made it even worse witch I didn't expect since it is quiet like a mouse in my Prusa printer.

Another peculiar thing I noticed when I tried different e-steps for my extruder was that is was totally silent when I used a value of 395, iirc, and with the value of 413, that I need to have, it makes a relatively loud noise.
How can that be?

As you surely can tell I don't have much experience with this so any help and/or suggestions are much appreciated.

/Micke

; Configuration file for Duet 3 Mini 5+ (firmware version 3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v3.2.3 on Sat Jul 17 2021 14:24:58 GMT+0200 (CEST)

; General preferences
G90                                          ; send absolute coordinates...
M83                                          ; ...but relative extruder moves
M550 P"Tower Of Babel"                       ; set printer name

; Network
M552 P192.168.1.35 S1                        ; enable network and set IP address
M553 P255.255.255.0                          ; set netmask
M554 P192.168.1.1                            ; set gateway
M586 P0 S1                                   ; enable HTTP
M586 P1 S0                                   ; disable FTP
M586 P2 S0                                   ; disable Telnet

; Drives
M569 P0.0 S0                                 ; x - physical drive 0.0 goes backwards
M569 P0.1 S1                                 ; y - physical drive 0.1 goes forwards
M569 P0.2 S1                                 ; z - physical drive 0.2 goes forwards
M569 P0.3 S0                                 ; e - physical drive 0.3 goes backwards
M584 X0.0 Y0.1 Z0.2 E0.3                     ; set drive mapping
M350 X16 Y16 Z16 E16 I1                      ; configure microstepping with interpolation
M92 X93.50 Y92.50 Z400.00 E413.00            ; set steps per mm [X93.50 Y92.50 Z400.00 E413.00][E415 according to bondtech]
M566 X300 Y300 Z50 E3000 P1                  ; set maximum instantaneous speed changes (mm/min) (Jerk speed) [X900 Y900 Z200 E3000 P1]
M203 X9000.00 Y9000.00 Z400.00 E4500.00      ; set maximum speeds (mm/min)
M201 X800.00 Y800.00 Z50.00 E800.00          ; set accelerations (mm/s^2)
M906 X600 Y570 Z680 E680 I30                 ; set motor currents (mA) and motor idle factor in per cent [Z1.0Ah E0.8Ah]
M84 S30                                      ; Set idle timeout

; Axis Limits
M208 X0 Y0 Z0 S1                             ; set axis minima
M208 X120 Y120 Z120 S0                       ; set axis maxima

; Endstops
M574 X1 S1 P"!io5.in"                         ; configure active-high endstop for low end on X via pin io5.in !=reverse
M574 Y1 S1 P"!io6.in"                         ; configure active-high endstop for low end on Y via pin io6.in
M574 Z1 S1 P"!io2.in"                         ; configure active-high endstop for low end on Z via pin io2.in

; Z-Probe
M558 P0 H3 F120 T3000                        ; disable Z probe but set dive height, probe speed and travel speed
M557 X15:120 Y15:120 S20                     ; define mesh grid

; Heaters
M308 S0 P"temp0" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin temp0
M950 H0 C"out0" T0                           ; create bed heater output on out0 and map it to sensor 0
M307 H0 B0 S1.00                             ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0                                      ; map heated bed to heater 0
M143 H0 S65                                  ; set temperature limit for heater 0 to 65C
M308 S1 P"temp1" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin temp1
M950 H1 C"out1" T1                           ; create nozzle heater output on out1 and map it to sensor 1
M307 H1 B0 S1.00                             ; disable bang-bang mode for heater  and set PWM limit
M143 H1 S280                                 ; set temperature limit for heater 1 to 280C

; Fans
M950 F0 C"out4" Q50                          ; create fan 0 on pin out4 and set its frequency
M950 F1 C"out3+out3.tach" Q30                ; create fan 1 on pin out3 and set its frequency
M106 P1 T45 S190 H1:2                        ; set fan 1 value. thermostatic control is turned on over 45degC

; Tools
M563 P0 S"HotEnd" D0 H1 F0                   ; define tool 0
G10 P0 X0 Y0 Z0                              ; set tool 0 axis offsets
G10 P0 R0 S0                                 ; set initial tool 0 active and standby temperatures to 0C

; Custom settings are not defined

; Miscellaneous
M575 P1 S1 B57600                            ; enable support for PanelDue
M501                                         ; load saved parameters from non-volatile memory
T0                                           ; select first tool
M572 D0 S0.02                                ; enable pressure advance -value of 0.02

@phaedrux
That makes a lot of sense, thank you.
I’m adapting to the wonderful world of RRF and g-codes from more than five years with Marlin

@phaedrux @Torro

Sorry for hijacking the thread
What are the pro and cons of using firmware retractions?

To me it seems a lot easier to use the settings in the slicer so you can have different settings for different materials e.g PLA and TPU, rather than changing your config.g. But maybe I’m missing something?

@paralepsis
Thanks for the pictures. It looks like a fun project.
I will have to test to raise the microstepping and see what happens. The printer I’m playing with is a really cheap one that has a ordinary M5 as Z lead with a (I think) pitch of 0.75mm so it’s less then ideal

@paralepsis said in Rebuilding MakerBot R2X, implications of E steps/mm:

Just to follow up on this, swapping in a 0.9 degree motor was a no brainer and helped things.

Do you have any before and after pictures? That would be very interesting to see.

I am currently thinking of changing to 32x or 64x microstepping as well.

@rkaronde Maybe another silly question but have you tried cleaning your bed? I regularly clean my bed with isopropyl alcohol but once in a while I have to clean it with hot water and washing-up liquid and that can be the difference between night and day sometimes. Even though I never ever touch my bed and it looks squeaky clean there can be some residue on it.

@zapta
I’ll totally agree that it would be an challenge, and as you said; how would you wind them all up and have them synchronized..
You just gave me something to think about for a long time

As for the resin printer, thats on the list but won’t get realized for some time I’m afraid. I just ordered an V-core 3 that I’m looking really forward to build.

/Micke

@zapta
I only bought 15

@jay_s_uk
Thanks!
I have a big grin on my face now and I will order them straight away

@jay_s_uk
I have my own ideas on what to make and print and put on top of them, but your link gave me a name for what I'm looking for 'Windup walkers' or 'Walker feet'. A quick search on amazon didn't give much but now I have a clue to what to look for.

Thanks,
and if anyone know where to get a hold of these feet please let me know

If this is to off topic or off category please move it to where it belongs.

I was looking on an old documentary about CERN and they had this 3D printed thingies that they had put on these feet that are winded so they walk around. This caught my attention and childish imagination a few years back when I first saw the documentary and now finally I stumbled upon it again and took a screenshot.

Can anyone tell anything about them; what are they called, where can you get them, what to search for..

Thanks

@alankilian @DIY-O-Sphere

Thank you both, now I got it

@diy-o-sphere
Thank you,
It says ‘Plug your fan into one of the PWM fan pins’

On my Duet 3 Mini 5+ board, where do I connect my fan?

I have a hotend with just one fan.

How can I keep the fan on after the print is done and shut it off either after a period of time or when extruder gets down to a certain temp?

@fcwilt
Ok, I see what you mean, I am somewhat familiar with g codes just not how the "structure" works in a Duet with the different .g files.

But this will get me started, Thank you!

@fcwilt Thanks!
With regards to my previous post, about me having a config.zip file uploaded to the duet, how shall I do with that file? Or maybe that file contains the config.g file.

Ahhhh. Sorry for being impatient and all over the place.

@cosmowave You are talking to a toddler, how do I do to create it with the configurator and where can I find the configurator?

Yesterday I ran some configurator on the web, to configure my duet and downloaded a config.zip afterwards. I just now uploaded that zip file to the duet and downloaded it in DWC and I edited in this:

; Network
M552 S1 P192.168.1.35 ; enable network
M586 P0 S1 ; enable HTTP
M586 P1 S0 ; disable FTP
M586 P2 S0 ; disable Telnet

And then saved it, does this mean that the ethernet is activated with my specified IP Address permanently?

But I still miss the config.g file

I'm trying to setup my Duet 3 Mini 5+ (ethernet) for the first time.

Looking at the setup guide+Getting+Connected+to+your+Duet/7) at step 12 you are supposed to have access to the config.g file, I have not. See my screenshot.
I want to set my IP so the ethernet connection doesn't get lost when I reboot/restart.

I am using a Mac and Safari, I have tried Firefox as well. As a terminal program I'm using SerialTools.

I updated to latest RRF by double press the reset button and transfer the latest file to the duet (sorry, can't remember exactly what it was called, this is all very new to me) and the Duet rebooted after installing upgrade file.
Afterwards I ran M115 in SerialTools and got the respons that I'm running FFR 3.3 and it was shipped with something like 3.1 beta*** So I guess the update worked(?)

I am lost..

@jay_s_uk said in Noob questions regarding Primacreator P120 D3M5+ project:

@tmicke sorry. I'd assumed you'd already fitted the board. Sorry

No worries, in a way I learned something new

Have a nice day

@phaedrux

Oh, I was writing when you posted..
Thanks for the tips, I'll look into them.