Topics created by vbtalent

Yes, with 2 standard 2-pin jumpers; so that pin 1 is connected to pin 2, and pin 3 is connected to pin 4.

Thanks David.

I'll be giving that a shot before long then.

ampapa,

Thanks.

@vbtalent:

…
Assuming a 305x305x305 machine should it be the following is order important?

M208 X305 Y305 Z305 S1 ; Set axis maxima M208 X0 Y0 Z0 S1 ; Set axis minima

I then can remove the G92 commands from all the home'ing config's?

VB,

OK, thanks… S0 is for maxima and S1 is for minima in which case order is irrelevant.

M208 X305 Y305 Z305 S0 ; Set axis maxima M208 X0 Y0 Z0 S1 ; Set axis minima

OK, great!

Thanks for the direction… Slicer controls fan in G-Code... M106 not required in config.g.

Sorry about the additional work, lol!

VB,

No worries… thanks for clarifying.

Finally figured out that the problem I was having with the homing of the Xaxis was that the end stop switch had become bent and wasn't making contact, out of sight and fun to track down.

VB,

Perfect thanks.

Appreciate the quick response.

VB,