Webcam setup but not showing in D2W
-
I do!
-
This is what I have:
https://forum.duet3d.com/topic/10067/cheap-wifi-webcam-esp32-ov2640-camera
-
I'm not an expert on this, but have you tried checking "Do not append extra http qualifier"?
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
Have to take the card out but its late, but I would have what is default seeing I never controlled or changhed anything.
My camera needs to have the user name and password when I connect fron the D2W, does your camera ask for a user and password? -
No U or P. it's really simple. The thing is, if I just open up the IP in a browser window it works like a charm!
-
@dc42
Not that I can tell... -
@bearcattd said in Webcam setup but not showing in D2W:
@dc42
Not that I can tell...What I meant is, there is a checkbox in DWC webcam setup that you can either check or leave unchecked. Some cameras need it checked (i.e. enabled), some need it un-checked.
-
I'm bumping this thread because I am having the same issue (DWC 2.0.7)
The camera HTTP link is well formed, and I have tried all combinations of the "do not append..." and "embed webcam..." sliders. No image loads.
However, if I right-click that broken image icon and choose 'view image in new tab', boom, there is my image. Seems like an issue with DWC.
-
@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?
-
@Phaedrux said in Webcam setup but not showing in D2W:
@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?
It's an Amcrest 1P2M-841B and the secondary stream should be in JPG / MJPG format.
Here is the DWC webcam configuration page:
