Webcam setup but not showing in D2W

BearcatTD

I got my webcam working, BIG thanks to @frank26080115 . But When trying to integrate it into D2W, I get the error on the "Job Status" page, "Your Duet rejected the HTTP request: page not found
Check that the SD card is mounted and has the correct files in its /www folder". I removed the SD card from the board and looked in the WWW folder, but I am not sure what exactly needs to be in there. It appears that everything else is as it should be. I can access the camera with the same ip address straight on the browser that I have entered in D2W Webcam integration. I also have "Embed Webcam Stream" checked.

Thoughts?!

Synapsis

I can tell you what I have setup and working, in Settings-General under Webcam I have in Webcam URL
"http://192.X.X.X:XXXX/videostream.cgi?loginuse=yourlogin&loginpas=yourpassword"
Webcam update 5000ms and webcam image embeded in iframe selected.
My camera is a Sance

Using the http link in the browser should open the webcam if it does then it should work in D2W.

BearcatTD

@synapsis

Mine is setup almost exactly the same. If you have a second, could you tell me what files are in your www folder on your sd card!?

Thanks!

BearcatTD

Ok, I've moved beyond the first error to "10.X.X.X took too long to respond" I'm not sure what else to adjust. I've included a couple of image links to show what I am seeing. alt text

Thanks!

dc42

If you enter http://10.0.1.21 into your browser address bar, do you get an image from the webcam?

BearcatTD

@dc42

I do!

BearcatTD

@bearcattd

This is what I have:

https://forum.duet3d.com/topic/10067/cheap-wifi-webcam-esp32-ov2640-camera

dc42

I'm not an expert on this, but have you tried checking "Do not append extra http qualifier"?

Synapsis

Have to take the card out but its late, but I would have what is default seeing I never controlled or changhed anything.
My camera needs to have the user name and password when I connect fron the D2W, does your camera ask for a user and password?

BearcatTD

No U or P. it's really simple. The thing is, if I just open up the IP in a browser window it works like a charm!

BearcatTD

@dc42
Not that I can tell...

dc42

@bearcattd said in Webcam setup but not showing in D2W:

@dc42
Not that I can tell...

What I meant is, there is a checkbox in DWC webcam setup that you can either check or leave unchecked. Some cameras need it checked (i.e. enabled), some need it un-checked.

CCS86

I'm bumping this thread because I am having the same issue (DWC 2.0.7)

The camera HTTP link is well formed, and I have tried all combinations of the "do not append..." and "embed webcam..." sliders. No image loads.

However, if I right-click that broken image icon and choose 'view image in new tab', boom, there is my image. Seems like an issue with DWC.

@dc42

Phaedrux

@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?

CCS86

@Phaedrux said in Webcam setup but not showing in D2W:

@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?

It's an Amcrest 1P2M-841B and the secondary stream should be in JPG / MJPG format.

Here is the DWC webcam configuration page: