Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    CR-10+Bondtech+Silicon Bed 450W+Microswiss...Help

    Scheduled Pinned Locked Moved
    General Discussion
    4
    45
    1.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Hélder Rochaundefined
      Hélder Rocha
      last edited by

      Hi guys, fist of all, thankyou very much for the help. Im sorry but the last few days ive been working out and has been impossible for me to check this forum.

      Chriss, the end of my g.code for a test cube on cura is like this:

      ;TIME_ELAPSED:2011.898237
      G1 F2700 E-3
      M140 S0
      M82 ;absolute extrusion mode
      M107
      G91 ;Relative positioning
      G1 E-2 F2700 ;Retract a bit
      G1 E-2 Z0.2 F2400 ;Retract and raise Z
      G1 X5 Y5 F3000 ;Wipe out
      G1 Z10 ;Raise Z more
      G90 ;Absolute positionning

      G1 X0 Y300 ;Present print
      M106 S0 ;Turn-off fan
      M104 S0 ;Turn-off hotend
      M140 S0 ;Turn-off bed

      M84 X Y E ;Disable all steppers but Z

      M83 ;relative extrusion mode
      M104 S0
      ;End of Gcode
      ;SETTING_3 {"extruder_quality": ["[general]\nversion = 4\nname = Dynamic Quali
      ;SETTING_3 ty #2\ndefinition = creality_cr10\n\n[metadata]\nquality_type = a
      ;SETTING_3 daptive\nposition = 0\ntype = quality_changes\n\n[values]\ncoast
      ;SETTING_3 ing_enable = True\nmaterial_print_temperature = 220\nretraction_amo
      ;SETTING_3 unt = 3\nretraction_extrusion_window = 6\nspeed_print = 60\n\n"],
      ;SETTING_3 "global_quality": "[general]\nversion = 4\nname = Dynamic Quality
      ;SETTING_3 #2\ndefinition = creality_base\n\n[metadata]\nquality_type = adap
      ;SETTING_3 tive\ntype = quality_changes\n\n[values]\n\n"}

      However, the printer doesnt do nothing, and it stays stoped on top of the print.
      As Jay_s_uk said, is it possible to for a conflit between this G.code from cura and a Stop.G on the duet? If it is, i cant find that stop.g in the duet config!

      Phaedrux, "Can you control the part cooling fan with the slider in dwc?" i cant even make the fan tests with the macros i have, but, for the momment, thats not a problem. The speed is what is troubelling me for now.

      Sorry for my gramatics...
      Best regards

      Chrissundefined 1 Reply Last reply Reply Quote 0
      • Chrissundefined
        Chriss @Hélder Rocha
        last edited by

        @Hélder-Rocha

        Phaedrux describes stop.g here:
        https://forum.duet3d.com/topic/6760/stop-g/2

        I think that you do not have the "M0" in your endcode in your slicer. 😉 You can test your code fist by adding it the the endcode of your slicer for testing.

        Cheers, Chriss

        1 Reply Last reply Reply Quote 0
        • Hélder Rochaundefined
          Hélder Rocha
          last edited by

          Tks Chriss.
          How you know, when we find ourselfs a bit lost, we have to solve one problem at the time. For now, i wold like to find what is making my printer so slow. On the web panel i find the speed between 8 and 12 mm/sec. I have Cura 4.6.1 and g.code is reprap flavor. Do you know how can i make the printing faster?

          1 Reply Last reply Reply Quote 0
          • Hélder Rochaundefined
            Hélder Rocha
            last edited by

            e63ad07a-861e-4099-8b27-35f2d53607da-image.png

            This is my inicial g.code on the machine settings. However, in my cnfig is like this:

            Config.jpg

            1 Reply Last reply Reply Quote 0
            • Hélder Rochaundefined
              Hélder Rocha
              last edited by

              M201 and M203 are complitly different!

              Chrissundefined 1 Reply Last reply Reply Quote 0
              • Chrissundefined
                Chriss @Hélder Rocha
                last edited by

                @Hélder-Rocha

                I know how you feel.. I struggle with my CR10 a lot too. That blood thing behaves very strange but I have lost my motivation to debug that further. I will continue on mine after this weekend.

                M201 and M203 "must" be different. M203 set the maximum speed you printer can go. The acceleration (M201) is more the latency the head have when it accelerates. I would recommend to read the docu, it describes it better than I can.

                For your speed problem: Did you checked your speed setting in the cura profile?

                Mine look like that:
                aaf0ca96-d914-4cd0-b257-9add220a9638-image.png

                Use them as reference only please! I work on them at the moment and my setup in guaranteed not very good. But I can tell you that this settings result in acceptable print speeds.

                Here is my current setup for the steppers:

                M350 E16 I1                                    ; Chriss - with interpolation
                M350 X16 Y16 Z16 I1                            ; Chriss - configure microstepping with interpolation
                M92 X80.00 Y80.16 Z400.00 E431.06              ; Chriss - set steps per mm  
                M566 X900.00 Y900.00 Z12.00 E120.00            ; Chriss - set maximum instantaneous speed changes (mm/min)
                M203 X6000.00 Y6000.00 Z800.00 E1200.00        ; Chriss - set maximum speeds (mm/min) Z180
                M201 X500.00 Y500.00 Z20.00 E250.00            ; Chriss - set accelerations (mm/s^2)
                M906 X800 Y800 Z800 E800 I30                   ; set motor currents (mA) and motor idle factor in per cent
                M84 S30                                        ; Set idle timeout
                

                Cheers, Chriss

                Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  @Hélder-Rocha Remove the lines from the cura start gcode section. Your profile has inserted a bunch of speed settings that are overriding your config.g.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                  • Hélder Rochaundefined
                    Hélder Rocha @Chriss
                    last edited by

                    @Chriss my speed on cura looks like this:
                    5cf1e533-1498-44bf-ac3f-5819e088c7ac-image.png

                    1 Reply Last reply Reply Quote 0
                    • Hélder Rochaundefined
                      Hélder Rocha @Phaedrux
                      last edited by

                      @Phaedrux , those lines you are talking about are those from the g.code in the object i want to print, or can i erase the complet start g.code in the printer settings in cura?

                      Chrissundefined 1 Reply Last reply Reply Quote 0
                      • Chrissundefined
                        Chriss @Hélder Rocha
                        last edited by

                        @Hélder-Rocha

                        Remove at least the M20X lines... They override .. Well as Phaedrux said....

                        1 Reply Last reply Reply Quote 0
                        • Hélder Rochaundefined
                          Hélder Rocha
                          last edited by

                          Well, in the next image i have 2 g.codes. one with the start gcode from cura and the other with out it.... will the second work?

                          1a4c81ed-b797-4743-9abc-2e21c1538950-image.png

                          Chrissundefined 1 Reply Last reply Reply Quote 0
                          • Chrissundefined
                            Chriss @Hélder Rocha
                            last edited by

                            @Hélder-Rocha
                            Looks Good to me. As long as you keep the M20x in the config.g. There must me at least one place where you set some limits which should match your hardware and other settings.

                            Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                            • Hélder Rochaundefined
                              Hélder Rocha @Chriss
                              last edited by

                              @Chriss i beleave is there! Looks good?

                              Going now downstairs to the garage and try it

                              ; Drives
                              M569 P0 S0 ; Drive 0 goes backwards
                              M569 P1 S0 ; Drive 1 goes backwards
                              M569 P2 S0 ; Drive 2 goes backwards
                              M569 P3 S1 ; Drive 3 goes forwards
                              M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
                              M92 X80.00 Y80.00 Z408.00 E820.00 ; Set steps per mm Z400
                              M566 X600.00 Y600.00 Z24.00 E1200.00 ; Set maximum instantaneous speed changes (mm/min)
                              M203 X30000.00 Y30000.00 Z300.00 E1500.00 ; Set maximum speeds (mm/min)
                              M201 X1000.00 Y1000.00 Z100.00 E10000.00 ; Set accelerations (mm/s^2)
                              M906 X750.00 Y1150.00 Z750.00 E1050.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
                              M84 S300 ; Set idle timeout
                              ✌

                              1 Reply Last reply Reply Quote 0
                              • Hélder Rochaundefined
                                Hélder Rocha
                                last edited by

                                YESSSSSSSSSSSSSSSSSS... speed is normal now. Tks a lot guys... are you ready for the next problem i have? eh eh

                                Allright... my config for homeall with the bltouch. Is the original one, not replica. Is the smart bltouch 2020.
                                But first one question: i heve seen in some toturials that we should make a cut with a knife, because of the 3.3 v power or something like that!!! Is it needed to be done on this bltouch?

                                My config next:

                                ; homeall.g
                                ; called to home all axes
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Wed Dec 26 2018 13:31:24 GMT+0000 (Hora padrão da Europa Ocidental)
                                G91 ; relative positioning
                                G1 Z5 F6000 S2 ; lift Z relative to current position
                                M98 Pdeployprobe.g ; deploy mechanical Z probe
                                G1 S1 X-305 Y-305 F1800 ; move quickly to X and Y axis endstops and stop there (first pass)
                                G1 X5 Y5 F6000 ; go back a few mm
                                G1 S1 X-305 Y-305 F360 ; move slowly to X and Y axis endstops once more (second pass)
                                G90 ; absolute positioning
                                G1 X200 Y150 F6000 ; go to first bed probe point and home Z
                                G30 ; home Z by probing the bed

                                ; Uncomment the following lines to lift Z after probing
                                ;G91 ; relative positioning
                                ;G1 S2 Z5 F100 ; lift Z relative to current position
                                ;G90 ; absolute positioning

                                M98 Pretractprobe.g ; retract mechanical Z probe

                                Ok... at the momment, i have the bltouch installed, but i am doing the home return with endstops swich. But first i tried this config and what apenned is that the printer does the x and y, but doesnt come down to make the measures!

                                Any sugestions?

                                Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                • Phaedruxundefined
                                  Phaedrux Moderator
                                  last edited by

                                  No you don't have to cut any trace now.

                                  Please post you config.g as text.

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                                  • Hélder Rochaundefined
                                    Hélder Rocha @Phaedrux
                                    last edited by

                                    @Phaedrux Good morning, sorry at the time i went to bed. My config is like this:

                                    ; Configuration file for Duet WiFi (firmware version 1.21)
                                    ; executed by the firmware on start-up
                                    ;
                                    ; generated by RepRapFirmware Configuration Tool v2 on Wed Dec 26 2018 13:31:24 GMT+0000 (Hora padrão da Europa Ocidental)

                                    ; General preferences
                                    M111 S0 ; Debugging off
                                    G21 ; Work in millimetres
                                    G90 ; Send absolute coordinates...
                                    M83 ; ...but relative extruder moves
                                    M555 P2 ; Set firmware compatibility to look like Marlin

                                    ; Network
                                    M550 P"Cr 10 - S" ; Set machine name
                                    M552 S1 ; Enable network
                                    ;*** Access point is configured manually via M587
                                    M586 P0 S1 ; Enable HTTP
                                    M586 P1 S0 ; Disable FTP
                                    M586 P2 S0 ; Disable Telnet

                                    ; Drives
                                    M569 P0 S0 ; Drive 0 goes backwards
                                    M569 P1 S0 ; Drive 1 goes backwards
                                    M569 P2 S0 ; Drive 2 goes backwards
                                    M569 P3 S1 ; Drive 3 goes forwards
                                    M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
                                    M92 X80.00 Y80.00 Z408.00 E820.00 ; Set steps per mm Z400
                                    M566 X600.00 Y600.00 Z24.00 E1200.00 ; Set maximum instantaneous speed changes (mm/min)
                                    M203 X30000.00 Y30000.00 Z300.00 E1500.00 ; Set maximum speeds (mm/min)
                                    M201 X1000.00 Y1000.00 Z100.00 E10000.00 ; Set accelerations (mm/s^2)
                                    M906 X750.00 Y1150.00 Z750.00 E1050.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
                                    M84 S300 ; Set idle timeout

                                    ; Axis Limits
                                    M208 X0 Y0 Z0 S1 ; Set axis minima
                                    M208 X300 Y300 Z400 S0 ; Set axis maxima

                                    ; Endstops
                                    M574 X1 Y1 S1 ; Set active high endstops

                                    ; Z-Probe
                                    M574 Z1 S2 ; Set endstops controlled by probe
                                    M307 H3 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch
                                    M558 P9 H5 F120 T6000 A5 S0.02 ; Set Z probe type to bltouch and the dive height + speeds
                                    G31 P25 X-40 Y-10 Z1.20 ; Set Z probe trigger value, offset and trigger height
                                    M557 X50:250 Y50:250 S50 ; Define mesh grid

                                    ; Heaters
                                    M305 P0 T100000 B3950 C0 R4700 ; Set thermistor + ADC parameters for heater 0
                                    M143 H0 S120 ; Set temperature limit for heater 0 to 120C
                                    M305 P1 T100000 B4725 C7.060000e-8 R4700 ; Set thermistor + ADC parameters for heater 1
                                    M143 H1 S290 ; Set temperature limit for heater 1 to 290C

                                    ; Fans
                                    M106 P0 S0 I0 F30 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
                                    M106 P1 S0.5 I0 F500 H1 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
                                    M106 P2 S0 I0 F500 H-1 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned off

                                    ; Tools
                                    M563 P0 D0 H1 ; Define tool 0
                                    G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
                                    G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

                                    ; Automatic power saving
                                    M911 S22 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; Set voltage thresholds and actions to run on power loss

                                    ; Custom settings are not configured
                                    M912 P0 S-1 ; calibrate MCU Temp

                                    ; pressure advance
                                    M572 D0 S0.3 ; pressure advance

                                    ; Miscellaneous
                                    M501 ; Load saved parameters from non-volatile memory

                                    1 Reply Last reply Reply Quote 0
                                    • Phaedruxundefined
                                      Phaedrux Moderator @Hélder Rocha
                                      last edited by

                                      @Hélder-Rocha said in CR-10+Bondtech+Silicon Bed 450W+Microswiss...Help:

                                      M98 Pdeployprobe.g ; deploy mechanical Z probe
                                      M98 Pretractprobe.g ; retract mechanical Z probe

                                      Remove those parts from your homing file. You don't need to control the pin manually. It should deploy automatically with G30.

                                      Please test M401 and M402 to deploy and retract the probe, and post your retractprobe.g and deployprobe.g files.

                                      Also check your config-override.g file and look for an M307 H3 command that could be over writing your M307 H3 A-1 C-1 D-1 ; Disable heater on PWM channel for BLTouch

                                      Z-Bot CoreXY Build | Thingiverse Profile

                                      Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                                      • Hélder Rochaundefined
                                        Hélder Rocha @Phaedrux
                                        last edited by

                                        @Phaedrux hello... tks a lot for your time and patience with my issues.

                                        ; deployprobe.g
                                        ; called to deploy a physical Z probe
                                        ;
                                        ; generated by RepRapFirmware Configuration Tool v2 on Wed Dec 26 2018 13:31:24 GMT+0000 (Hora padrão da Europa Ocidental)
                                        M280 P3 S10 I1

                                        ; retractprobe.g
                                        ; called to retract a physical Z probe
                                        ;
                                        ; generated by RepRapFirmware Configuration Tool on Thu Sep 06 2018 21:21:12 GMT-0700 (Pacific Daylight Time)
                                        M280 P3 S90 I1

                                        sorry but a think i dont have that config-hoverride.g

                                        8ac92e5a-5241-4b77-9766-d01c449c1cf0-image.png

                                        Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                        • Phaedruxundefined
                                          Phaedrux Moderator @Hélder Rocha
                                          last edited by

                                          @Hélder-Rocha said in CR-10+Bondtech+Silicon Bed 450W+Microswiss...Help:

                                          sorry but a think i dont have that config-hoverride.g

                                          That's fine.

                                          Did you test if M401 and M402 deploy and retract the probe pin?

                                          If that works, test the porbe as described here: https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          Hélder Rochaundefined 1 Reply Last reply Reply Quote 0
                                          • Hélder Rochaundefined
                                            Hélder Rocha @Phaedrux
                                            last edited by

                                            @Phaedrux i havent test it yet... ill try tomorrow....

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA