Error M587:Failed to add SSID to remembered list.
-
Hello.
Yesterday when I tried to print from SD card, suddenly the light of the wifi module started to blink very fast.
After that I appeared that the wifi module doesn't work.
I have once Erased the Firmware from the board and re-installed.
The version is 2.05.1.
Then I sent M552 S1 and M587 S"ooxx" P"ooxx"
Unfortuantely the error "M587:Failed to add SSID to remembered list." came back.
I have sent only M587.
Then I see, "Failed to retrieve network list"
Maybe the wifi module has got a problem ???
Please help! -
i suggest reflashing the wifi firmware first
https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Updating_WiFi_firmware
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/DuetWiFiServer-1.23.binOwns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@Hiroaki Connect via USB, send
M552 S-1to turn WiFi off, thenM552 S0to turn it on, but in idle mode, then add the SSID with M587. Finally, enable WiFi withM552 S1.Ian
Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth
-
@jay_s_uk Hello Thank you for your comment.
I have done it, but still the same... -
@droftarts Hello. Thank you for your comment, I did it.
When I send M552 S-1, the light of the wifi module was turned off.
When I sent M552 S0, it's turned on again.
But when I sent M587 S"ooxx" P"ooxx" it's still the same...Only One I can't get is "Idle mode" I put....
-
@Hiroaki Sorry "Idle mode" you put.
-
@Hiroaki Can you send M122 and post full reply. How old is the Duet?
And what board revision? eg 1.02, 1.04cIan
Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth
-
@droftarts
Hello The board is quite new.
I bought it about two months ago, but as I have been building the machine, it's still like new.
The answer of M122 is as floows. Thank you.
=== Diagnostics ===<LF>RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later + DueX5<LF>Board ID: 08DJM-956GL-M43T0-6JKDL-3S86P-994YQ<LF>Used output buffers: 1 of 24 (2 max)<LF>=== RTOS ===<LF>Static ram: 25712<LF>Dynamic ram: 93980 of which 84 recycled<LF>Exception stack ram used: 264<LF>Never used ram: 11032<LF>Tasks: NETWORK(ready,1884) HEAT(blocked,1232) DUEX(suspended,160) MAIN(running,3824) IDLE(ready,160)<LF>Owned mutexes:<LF>=== Platform ===<LF>Last reset 00:00:14 ago, cause: power up<LF>Last software reset time unknown, reason: User, spinning module GCodes, available RAM 10896 bytes (slot 2)<LF>Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d<LF>Error status: 0<LF>Free file entries: 10<LF>SD card 0 detected, interface speed: 20.0MBytes/sec<LF>SD card longest block write time: 0.0ms, max retries 0<LF>MCU temperature: min 50.4, current 52.0, max 56.3<LF>Supply voltage: min 0.5, current 0.5, max 0.8, under voltage events: 0, over vol[Warning: Maximal number of bytes per line exceeded! Check the EOL (end-of-line) settings or increase the limit in the advanced terminal settings.] -
@Hiroaki The version is 1.04.
-
@Hiroaki The M122 reply has been cut off, and the WiFi diagnostics is missing. If you are connecting with YAT:
Set YAT to use <LF> as the end of line character. This will improve the readability of the messages coming from the Duet. Click "Text Settings" in the "Terminal Settings" and change "EOL sequence:" to <LF>. Click "OK" to close Text Settings. Click "OK" again to close Terminal Settings.
Ian
Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth
-
@droftarts Thank you.
This is it.
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DJM-956GL-M43T0-6JKDL-3S86P-994YQ
Used output buffers: 1 of 24 (2 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 93980 of which 84 recycled
Exception stack ram used: 264
Never used ram: 11032
Tasks: NETWORK(ready,1884) HEAT(blocked,1232) DUEX(suspended,160) MAIN(running,3836) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:06:48 ago, cause: power up
Last software reset time unknown, reason: User, spinning module GCodes, available RAM 10896 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 29.5, current 32.0, max 65.8
Supply voltage: min 0.0, current 0.5, max 0.6, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Driver 5: ok, SG min/max not available
Driver 6: ok, SG min/max not available
Driver 7: ok, SG min/max not available
Driver 8: ok, SG min/max not available
Driver 9: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 681994076
Slowest loop: 1.58ms; fastest: 0.05ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 0.84ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8- WiFi -
Network state is starting
WiFi module is disabled
Failed messages: pending 0, notready 0, noresp 0
Socket states: 0 0 0 0 0 0 0 0
ok
- WiFi -
-
M552 s-1
WiFi module stopped
ok
M552 s0
ok
M122
then it was still- WiFi -
Network state is starting
WiFi module is disabled
Failed messages: pending 0, notready 0, noresp 0
Socket states: 0 0 0 0 0 0 0 0
ok
- WiFi -
-
@Hiroaki Send M552 S-1, then M122, M552 S0, then M122, and M552 S1, then M122. This is what the response from my Duet 2 WiFi looks like (you can just copy the WiFi part at the end):
M552 S-1
WiFi module stopped
ok
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later
Board ID: 08DGM-9T6BU-FG3SD-6JKD4-3S86N-KAMHF
...
-WiFi -
Network state is disabled
WiFi module is disabled
Failed messages: pending 0, notready 0, noresp 0
Socket states: 0 0 0 0 0 0 0 0
okM552 S0
ok
WiFi module started
M122
...
-WiFi -
Network state is running
WiFi module is idle
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address a0:20:a6:31:b4:b9
WiFi Vcc 3.36, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 30176
Socket states: 0 0 0 0 0 0 0 0
okM552 S1
ok
WiFi module is connected to access point BTWholeHome-XXX, IP address 192.168.0.12
M122
...
-WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address a0:20:a6:31:b4:b9
WiFi Vcc 3.37, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25568
WiFi IP address 192.168.0.12
WiFi signal strength -43dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
okIf you're not getting something similar, I'd guess that the WiFi module has failed. The usual reason for this is a power surge on the 3.3V line; the WiFi board and SD card are often the first to fail if this has happened, but can protect the main processor from failing.
It is possible that the WiFi module firmware has not flashed correctly. Try downloading a fresh DuetWiFiServer-1.23.bin from https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1 and upload it to the 'sys' folder on the SD card, then send
M997 S1.Ian
Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth
-
Hello @Hiroaki... I have had this issue myself a few times. The advice here did solve it; but I had to do it a couple of times. Re-flashing the firmware more than once might be necessary. I also found that in BOSSA, using the setting "erase all" seemed to yield the best results. Good luck to you!
-
@droftarts Thank you. As it's getting late night, I will do it tomorrow.
By the way do you think it's possible to change the wifi module ? -
@beachtec Thank you. I will try tomorrow. It's 0:21AM ...
Best Regards -
@droftarts
One question .
Upload Duetwifiserver-1.23.bin to the SYS not WWW folder?
Regards -
@Hiroaki said in Error M587:Failed to add SSID to remembered list.:
One question .
Upload Duetwifiserver-1.23.bin to the SYS not WWW folder?Yes, firmware updates go in the 'sys' folder. The 'www' folder is for DWC components.
Ian
Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth
-
@droftarts ok Thank you.
-
DuetWiFiServer-1.23.bin
I think you'll need to rename the file and remove the
-1.23part so that the final file name is just DuetWiFiServer.bin
