Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    ONE PING ONLY --- M42

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    4
    20
    797
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • tecnoundefined
      tecno @jay_s_uk
      last edited by

      @jay_s_uk

      No M42 in config.g

      M950 in config.g
      M5000.g in sys

      Console command M5000

      It triggers but does it coninously instead of one shot

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @tecno
        last edited by

        @tecno maybe 0.5s is too long, try reducing to P100
        Otherwise it sounds like you might need to add something to pull it back down to ground once released?

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        tecnoundefined 1 Reply Last reply Reply Quote 0
        • tecnoundefined
          tecno @jay_s_uk
          last edited by

          @jay_s_uk
          Tested that still same issue

          tecnoundefined 1 Reply Last reply Reply Quote 0
          • tecnoundefined
            tecno @tecno
            last edited by

            @jay_s_uk said in ONE PING ONLY --- M42:

            @tecno maybe 0.5s is too long, try reducing to P100
            Otherwise it sounds like you might need to add something to pull it back down to ground once released?

            Take away the 1K serial resistor on output?

            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
            • jay_s_ukundefined
              jay_s_uk @tecno
              last edited by

              @tecno dunno, i'm not really an electronics guy

              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

              tecnoundefined 1 Reply Last reply Reply Quote 1
              • tecnoundefined
                tecno @jay_s_uk
                last edited by

                @jay_s_uk said in ONE PING ONLY --- M42:

                @tecno dunno, i'm not really an electronics guy

                Tested = same issue 😉

                Hopefully sombody else chimes in ta advice what to try next.

                Thanks !

                fcwiltundefined 1 Reply Last reply Reply Quote 0
                • fcwiltundefined
                  fcwilt @tecno
                  last edited by

                  @tecno

                  What are the specs on the device you have connected to that output?

                  What does it expect to see in the way of signal voltage and duration?

                  Frederick

                  Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                  tecnoundefined 1 Reply Last reply Reply Quote 0
                  • tecnoundefined
                    tecno @fcwilt
                    last edited by tecno

                    @fcwilt said in ONE PING ONLY --- M42:

                    @tecno

                    What are the specs on the device you have connected to that output?

                    What does it expect to see in the way of signal voltage and duration?

                    Frederick

                    The IO output goes go GND to trigger camera ( switch is NO and swithes to ground )

                    https://forum.duet3d.com/topic/23976/mini5-bt-dongle-for-transmit/19

                    jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                    • jay_s_ukundefined
                      jay_s_uk @tecno
                      last edited by

                      @tecno can you change the M950 to

                      M950 P0 C"^io1.out" Q1
                      

                      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                      tecnoundefined 1 Reply Last reply Reply Quote 0
                      • tecnoundefined
                        tecno @jay_s_uk
                        last edited by

                        @jay_s_uk said in ONE PING ONLY --- M42:

                        @tecno can you change the M950 to

                        M950 P0 C"^io1.out" Q1
                        

                        Tried that still same issue with serial 1K, will test with no serial 1K

                        tecnoundefined 1 Reply Last reply Reply Quote 0
                        • tecnoundefined
                          tecno @tecno
                          last edited by

                          @fcwilt @jay_s_uk

                          IT WORKS NOW !!!

                          ;Camera trigger
                          M950 P0 C"!io1.out" Q1

                          Thank you guys, this forum is so helpful !

                          fcwiltundefined alankilianundefined 2 Replies Last reply Reply Quote 4
                          • fcwiltundefined
                            fcwilt @tecno
                            last edited by

                            @tecno said in ONE PING ONLY --- M42:

                            @fcwilt @jay_s_uk

                            IT WORKS NOW !!!

                            ;Camera trigger
                            M950 P0 C"!io1.out" Q1

                            Thank you guys, this forum is so helpful !

                            Glad to hear you got it working.

                            Do you understand why you needed that ! character?

                            Frederick

                            Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                            tecnoundefined 1 Reply Last reply Reply Quote 0
                            • alankilianundefined
                              alankilian @tecno
                              last edited by

                              @tecno

                              Excellent.

                              I did say:

                              I would put a series resistor inline.
                              Maybe 100 Ohms to 1,000 Ohms and try it.
                              

                              So I was already thinking 1,000 Ohms might be too large.

                              I'm glad you stuck with the experiments and got it working!

                              SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

                              tecnoundefined 1 Reply Last reply Reply Quote 0
                              • tecnoundefined
                                tecno @fcwilt
                                last edited by

                                @fcwilt said in ONE PING ONLY --- M42:

                                @tecno said in ONE PING ONLY --- M42:

                                @fcwilt @jay_s_uk

                                IT WORKS NOW !!!

                                ;Camera trigger
                                M950 P0 C"!io1.out" Q1

                                Thank you guys, this forum is so helpful !

                                Glad to hear you got it working.

                                Do you understand why you needed that ! character?

                                Frederick

                                This inverts the signal and by that the level rises above the trigg point in the BT circuit, right?

                                fcwiltundefined 1 Reply Last reply Reply Quote 0
                                • tecnoundefined
                                  tecno @alankilian
                                  last edited by

                                  @alankilian said in ONE PING ONLY --- M42:

                                  @tecno

                                  Excellent.

                                  I did say:

                                  I would put a series resistor inline.
                                  Maybe 100 Ohms to 1,000 Ohms and try it.
                                  

                                  So I was already thinking 1,000 Ohms might be too large.

                                  I'm glad you stuck with the experiments and got it working!

                                  Experiments are always good as long one tries to follow good practis, in my case ask questions frequently.

                                  Thanks for guidance!

                                  1 Reply Last reply Reply Quote 1
                                  • fcwiltundefined
                                    fcwilt @tecno
                                    last edited by

                                    @tecno said in ONE PING ONLY --- M42:

                                    @fcwilt said in ONE PING ONLY --- M42:

                                    @tecno said in ONE PING ONLY --- M42:

                                    @fcwilt @jay_s_uk

                                    IT WORKS NOW !!!

                                    ;Camera trigger
                                    M950 P0 C"!io1.out" Q1

                                    Thank you guys, this forum is so helpful !

                                    Glad to hear you got it working.

                                    Do you understand why you needed that ! character?

                                    Frederick

                                    This inverts the signal and by that the level rises above the trigg point in the BT circuit, right?

                                    Correct.

                                    Without that ! character the normal state of the output is low which is the state that triggers the camera. Adding that ! character makes the normal state of the output high.

                                    Frederick

                                    Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                                    1 Reply Last reply Reply Quote 2
                                    • First post
                                      Last post
                                    Unless otherwise noted, all forum content is licensed under CC-BY-SA