Updating to RRF 3.3

dc42

@rushmere3d read at least the Upgrade Notes section for release 3.3. You can skip the new features and bug fixes lists.

Falkia

@rushmere3d You can make a new config with the configtool and compare it with your current config.

Rushmere3D

Hey all,

So I've gone ahead and updated, no issues so far.

But Settings-General still shows DWC as 3.2.2, do I need to update this manually?

Thanks.

Phaedrux

@rushmere3d said in Updating to RRF 3.3:

But Settings-General still shows DWC as 3.2.2, do I need to update this manually?

I suggest you update by uploading the full zip file to the system tab in DWC.

https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip

That should get everything up to date.

Rushmere3D

@phaedrux

This is ok to do when running in SBC mode right?

Can't I updated just the DWC with a .zip?

Thanks.

Phaedrux

No in that case ity should be getting updated with sudo apt update and Sudo apt upgrade.

Can you share the results of m122 please?

rjenkinsgb

@rushmere3d said in Updating to RRF 3.3:

But Settings-General still shows DWC as 3.2.2, do I need to update this manually?

It could just be your web browser cache - try hitting F5, if using Chrome, or control & page refresh.

Mine does not show a DWC update until I force a browser refresh.

Rushmere3D

@phaedrux

Sure, it's odd. As it appears as 3.2.2 first then a F5 shows 3.3.0 but then it doesn't stay as 3.3.0?

6HC

M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3 (2021-06-15 21:45:47) running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)
Board ID: 08DGM-9T66A-G63SJ-6J1D8-3SD6R-KV0BA
Used output buffers: 3 of 40 (14 max)
=== RTOS ===
Static ram: 150904
Dynamic ram: 63728 of which 0 recycled
Never used RAM 139560, free system stack 132 words
Tasks: SBC(ready,5.8%,310) HEAT(delaying,0.0%,325) Move(notifyWait,0.0%,279) CanReceiv(notifyWait,0.0%,799) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,339) TMC(notifyWait,7.3%,59) MAIN(running,86.7%,922) IDLE(ready,0.0%,29), total 100.0%
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 00:05:13 ago, cause: power up
Last software reset at 2022-01-23 13:15, reason: User, none spinning, available RAM 136716, slot 0
Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0044a000 BFAR 0x00000000 SP 0x00000000 Task SBC Freestk 0 n/a
Error status: 0x00
Step timer max interval 188
MCU temperature: min 4.8, current 12.5, max 17.7
Supply voltage: min 23.9, current 24.0, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 10100, standstill, reads 42617, writes 28 timeouts 0, SG min/max 0/1023
Driver 1: position 19900, standstill, reads 42617, writes 28 timeouts 0, SG min/max 0/1023
Driver 2: position 4800, standstill, reads 42628, writes 17 timeouts 0, SG min/max 0/196
Driver 3: position 12250, standstill, reads 42633, writes 14 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 42633, writes 14 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 42619, writes 28 timeouts 0, SG min/max 0/993
Date/time: 2022-01-24 14:58:39
Slowest loop: 993.21ms; fastest: 0.04ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 252509ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 20, completed moves 20, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 2743, received 3472, lost 0, longest wait 1ms for reply type 6042, peak Tx sync delay 53, free buffers 49 (min 48), ts 1570/1569/0
Tx timeouts 0,0,0,0,0,0
=== SBC interface ===
State: 4, failed transfers: 1, checksum errors: 0
Last transfer: 3ms ago
RX/TX seq numbers: 9476/9476
SPI underruns 0, overruns 0
Disconnects: 0, timeouts: 0, IAP RAM available 0x2c810
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.3.0
Code buffer space: 4096
Configured SPI speed: 8000000Hz
Full transfers per second: 0.10, max wait times: 9.9ms/0.0ms
Codes per second: 0.00
Maximum length of RX/TX data transfers: 5332/984

3HC too.

M122 B1
Diagnostics for board 1:
Duet EXP3HC firmware version 3.3 (2021-06-15 16:12:41)
Bootloader ID: not available
Never used RAM 158696, free system stack 4400 words
Tasks: Move(notifyWait,0.0%,160) HEAT(delaying,0.0%,118) CanAsync(notifyWait,0.0%,69) CanRecv(notifyWait,0.0%,82) CanClock(notifyWait,0.0%,71) TMC(notifyWait,7.3%,63) MAIN(running,91.4%,334) IDLE(ready,0.0%,39) AIN(delaying,1.3%,263), total 100.0%
Last reset 00:07:45 ago, cause: software
Last software reset at 2021-08-16 15:20, reason: HardFault undefInstr imprec, available RAM 154848, slot 0
Software reset code 0x0060 HFSR 0x40000000 CFSR 0x00010400 ICSR 0x00000803 BFAR 0xe000ed38 SP 0x20003068 Task MAIN Freestk 386 ok
Stack: 00000000 00000000 2001cd90 00000f0d 00001f00 000249f5 00024a6a 21000000 000252fa 21000000 c4514360 49488282 0a1a0203 84e02041 50203502 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
Driver 0: position 0, 409.0 steps/mm,  standstill, reads 26897, writes 16 timeouts 0, SG min/max 0/0, steps req 0 done 0
Driver 1: position 0, 80.0 steps/mm,  standstill, reads 26902, writes 11 timeouts 0, SG min/max 0/0, steps req 0 done 0
Driver 2: position 0, 80.0 steps/mm,  standstill, reads 26903, writes 11 timeouts 0, SG min/max 0/0, steps req 0 done 0
Moves scheduled 0, completed 0, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0
Peak sync jitter 0/15, peak Rx sync delay 180, resyncs 0/0, no step interrupt scheduled
VIN: 24.3V, V12: 12.2V
MCU temperature: min 9.4C, current 20.4C, max 20.4C
Ticks since heat task active 213, ADC conversions started 465710, completed 465710, timed out 0, errs 0
Last sensors broadcast 0x00000008 found 1 218 ticks ago, loop time 0
CAN messages queued 5321, send timeouts 0, received 4114, lost 0, free buffers 37, min 37, error reg 100000
dup 0, oos 0/0/0/0, bm 0, wbm 0, rxMotionDelay 0

Rushmere3D

@rjenkinsgb

F5 fixes it until I reload the page from say a bookmark or close and open the browser.

jay_s_uk

@rushmere3d clear your cache then

Rushmere3D

@jay_s_uk

Yep, that's done it.

Updating to RRF 3.3

Robert J.