Suddenly extrusion buttons Extrude/Retract are grey!
-
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
; Tools
M563 P1 H1 F0 ; P1 = tool1 H1 = heater1 F1 = fan1
G10 P1 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P1 R0 S0 ; set initial tool 0 active and standby temperatures to 0C; Custom settings are not defined
; Miscellaneous
T1 ; select first toolchange those to these
; Tools M563 P0 H1 F0 ; P1 = tool1 H1 = heater1 F1 = fan1 G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C ; Custom settings are not defined ; Miscellaneous T0 -
OK, done that. But still no M302 P1 = all gray buttons
-
Updated FW = still same error
-
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
OK, done that. But still no M302 P1 = all gray buttons
If you've changed the tool from T1 to T0, then you need to use M302 P0 not M302 P1.Edit. Ignore that crap. Next time I'll try and engage my brain before typing.....
-
@deckingman i thought M302 was system wide? https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m302-allow-cold-extrudes
P1 = allow, P0 = not allow?Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@deckingman said in Suddenly extrusion buttons Extrude/Retract are grey!:
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
OK, done that. But still no M302 P1 = all gray buttons
If you've changed the tool from T1 to T0, then you need to use M302 P0 not M302 P1.
2022-08-18 12:57:49 M302 Cold extrusion is forbidden (use M302 P1 to allow it), min. extrusion temperature 160.0C, min. retraction temperature 90.0C 2022-08-18 12:57:39 M302 P0 -
@jay_s_uk said in Suddenly extrusion buttons Extrude/Retract are grey!:
@deckingman i thought M302 was system wide? https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m302-allow-cold-extrudes
P1 = allow, P0 = not allow?Oh crap - you are right of course - more caffeine needed
-
I hope I have finally found the error, did run RRF Config Tool and copied the config.g and now it looks lite it is working. Do have to finetune motorparameters. I can not see any differences other than speeds.
Will report my findings.
So it looks like writing data on µSD card is somehow corrupted. Is it possible the write process is too fast and no CRC or whatever to verify is done?
-
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
................ Is it possible the write process is too fast and no CRC or whatever to verify is done?
In DWC - Settings - Machine Specific, there is a toggle entitled "Use CRC32 checksums for uploads" or some such. Make sure it's "On".
-
Has always been ON
-
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
So it looks like writing data on µSD card is somehow corrupted. Is it possible the write process is too fast and no CRC or whatever to verify is done?
What makes you think there is an SD card corruption? Do you have an example of a corrupt file?
What make and size of SD card are you using? Try inserting it in a Windows PC and checking it for errors.
-
Hi Andy,
Config.g was damaged obviously as it did work with a new copy written on card.32G from Sandisk, no errors in Win.
-
@tecno So do you have the damaged version of the file? If so please post it....
-
@gloomyandy
As requested
config.g -
@tecno It seems unlikely that your file has any sort of SD card read/write corruption. I would have expected to see large parts of the file missing, invalid characters, lines oddly truncated, but that file seems to be perfectly formatted and complete.
I did however notice that your tool definition line M563 does not have a D parameter, which means that the tool will have no extruder drive associated with it (and is probably what caused your problem). See: https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m563-define-or-remove-a-tool
"If there is no 'D' field the tool has no drives." -
OK, You found a problem and that is the part Jay was helping with as regards fan issue.
Can very well be so that editing those lines D somehow disappeared with copy/paste.Thanks for looking into this, as always appreciated.
-
@tecno said in Suddenly extrusion buttons Extrude/Retract are grey!:
M563 P1 H1 F0
You don't have a motor assigned to the tool. You need a D value.
EDIT: I see Gloomyandy got you there first.
