Euclid facility

[A Former User]

@jumpedwithbothfeet When I go home all she goes to get the probe and pats the center of the bed.
Yes I can move all my axes.

[jay_s_uk]

@sgk lets start a fresh shall we? please post the contents of the following files.

• config.g

• homez.g

• homeall.g

• deployprobe.g

• retractprobe.g

• bed.g

[A Former User]

retractprobe.g homez.g homeall.g deployprobe.g config.g bed.g

want the files in raw or it goes in ZIP

[A Former User]

My bed 350x350x350 and prob euclid X0 y8. 5

[Phaedrux]

M558 K0 P5 C"^io2.in" H8 F300 60 T9000 A3 S0.01
G31 K0 P500 X-27.955 Y-18.716 Z1.033

If you include K0, you need to use K0 everywhere else the probe is called. You only have a single probe, so remove K0 from your config where you have it.

In your bed.g and home all you have a bunch of moves to pick the probe but then you also call the probe deploy. Your pickup moves should just be in the deploy macro.

G1 Y8.5 F6000 ; Pick Up Klicky
G1 X20 F2000 ;
G1 X0 F1000 ; Pick Up Klicky
G1 Y30 F1000 ;
G1 Y50 F6000 ; Pick Up Klicky
M401 ; deploy Z probe (omit if using bltouch)

[A Former User]

@phaedrux ok thank you I have to change the probe control in the bed m558 and g31?

[A Former User]

as this

[A Former User]

https://youtu.be/9wJ2RCimWXU
it gives me that

[Phaedrux]

@sgk said in Euclid facility:

as this

No. That's not what I meant at all. Your deploy and retract macros seem fine. You just need to call them with M401 and M402 in your bed.g and homeall.g files when you want to pick up or two away the probe. You don't need the manual G1 moves to pick it up there.

Did you remove the K0?

[A Former User]

@phaedrux k0 deleted

[A Former User]

I'm really sorry I'm completely lost at this point

[Phaedrux]

And return your deployprobe.g macro to how it was before?

With K0 removed, does G28, G32, and G29 function now?

[A Former User]

@phaedrux
I deleted my deploy and retract and I didn't save

[Phaedrux]

@sgk said in Euclid facility:

retractprobe.g homez.g homeall.g deployprobe.g config.g bed.g

want the files in raw or it goes in ZIP

Good thing you uploaded them here.

[A Former User]

@phaedrux yes nice

[A Former User]

it works but not very well every time the probe feels it comes home

[A Former User]

I will make a video

[A Former User]

and above all it does not balance the left and right bed

[A Former User]

https://youtu.be/Iv2z8CIwCVc

[A Former User]