Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Wifi 2.1beta6 from 3.5.0-rc.2/3 still disconnecting

    Scheduled Pinned Locked Moved Solved
    Beta Firmware
    10
    82
    4.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Chrissundefined
      Chriss
      last edited by

      Hi*,

      I still see many wifi disconnects om my Mini 5+ with 3.5.0-rc.2 and 3.5.0-rc.3 and Duet WiFi Server Version: 2.1beta6. I see that behaviour since 3.5.0-rc.2.
      Observed behaviour:
      I try to upload a gcode and the slicer reports that the printer on the IP is not answering. All Sessions with the DWC have the same problem and the IP is not pingable anymore. It is not new that the Mini5+ disconnects and reconnects (what I saw via the display) but seeing a reconnect but still not reachable afterwards is new since 3.5.0-rc.2 aka 2.1beta6.
      I was in the "lucky" situation to see that live. I was at the printer and I saw on the display that the board disconnected and reconnected. Ths SSID was correct and the IP too. But I was not able to ping, telnet or http the ip. The only solution was to power cycle the printer.

      Any ideas how to debug that? Any commands I should execute via the display when I'm back in that situation?

      (Before somebody asks: The IP is fixed to the MAC by my DHCP server, my workstation is connected via wire.)

      Cheers, Chriss

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Do you get the same issue with the 1.27 release?

        https://github.com/Duet3D/DuetWiFiSocketServer/releases/download/1.27/DuetWiFiServer.bin

        Z-Bot CoreXY Build | Thingiverse Profile

        chimaeraghundefined Chrissundefined 2 Replies Last reply Reply Quote 0
        • chimaeraghundefined
          chimaeragh @Phaedrux
          last edited by

          @Phaedrux Will the just released RRF 3.5rc3 work with WiFi Server 1.27?
          I had issues with connection being dropped on WiFiserver 2.1 on 3.5rc2 so I rolled back to RRF3.4.6

          Duet 2 Wifi, Ooznest Workbee CNC 1510

          moth4017undefined 1 Reply Last reply Reply Quote 0
          • moth4017undefined
            moth4017 @chimaeragh
            last edited by

            @chimaeragh im still getting disconnect too with Duet Web Control 3.5.0-rc.2,Duet WiFi Server n/a 1.27-04S-D

            <

            1 Reply Last reply Reply Quote 0
            • Chrissundefined
              Chriss @Phaedrux
              last edited by

              @Phaedrux I guess that this is the version pre 2.1beta6? I saw the disconnects and the reconnects there too. But with a lover cadence and the board was reachable after the reconnect. So I never complained.

              I can downgrade the wifi module if you want me to confirm that with 3.5rcX. Is it only me having that issue? I have 5 duet boards running here in my wifi and all 3.5rc boards have that hard problem. The others are fine.

              Cheers, Chriss

              1 Reply Last reply Reply Quote 0
              • Chrissundefined
                Chriss
                last edited by

                Do not get me wrong, I do not complain about the disconnects. I complain that the board is not reachable after the reconnect.

                gloomyandyundefined 1 Reply Last reply Reply Quote 0
                • gloomyandyundefined
                  gloomyandy @Chriss
                  last edited by

                  @Chriss Can you connect via USB and run M122 when DWC is in the disconnected state? If so please post the M122 output here.

                  Chrissundefined 1 Reply Last reply Reply Quote 0
                  • Chrissundefined
                    Chriss @gloomyandy
                    last edited by

                    @gloomyandy Hard to archive to be honest... I hope that I can do that via the console on the display and get you a picture. Let me do that when it happens the next time.

                    1 Reply Last reply Reply Quote 0
                    • moth4017undefined
                      moth4017
                      last edited by

                      i ran the printer most of the day with the USB lead connected and not one disconnect 😞

                      <

                      droftartsundefined 1 Reply Last reply Reply Quote 0
                      • droftartsundefined
                        droftarts administrators @moth4017
                        last edited by droftarts

                        @moth4017 @Chriss I'm also having the WiFi connection drop and then be unresponsive, running a Mini 5+ with RRF/DWC 3.5.0-rc.3 and Duet WiFi Server 2.1beta6. We're trying to catch this bug and fix it! Any help with this would be greatly appreciated.

                        I've just had another disconnection. I was manually sending Gcodes in the DWC console when DWC disconnected, and then sat trying to reconnect. There was no message that it had disconnected on the PanelDue. I couldn't ping the Duet using the local host name or IP address. Unfortunately I didn't notice if the WiFi LED was still on next to the WiFi module on the Duet.

                        I turned off the WiFi module module with M552 S-1 and back on again with M552 S1 via the connected PanelDue. I have a macro to do this now!

                        ; 1_WiFi off on
M552 S-1
G4 S5
M552 S1

                        To be able to track this bug down, the suggestion from the developer of the WiFi firmware is to turn on logging with M111 for the WiFi module and networking, eg:

                        M111 P1 S1
Debugging enabled for modules: Network(1 - 0xffffffff)
Debugging disabled for modules: Platform(0) Webserver(2) Gcodes(3) Move(4) Heat(5) Kinematics(6) InputShaping(7) unused2(8) PrintMonitor(9) Storage(10) PortControl(11) DuetExpansion(12) FilamentSensors(13) WiFi(14) Display(15) SbcInterface(16) CAN(17) Expansion(18)
M111 P14 S1
Debugging enabled for modules: Network(1 - 0xffffffff) WiFi(14 - 0xffffffff)
Debugging disabled for modules: Platform(0) Webserver(2) Gcodes(3) Move(4) Heat(5) Kinematics(6) InputShaping(7) unused2(8) PrintMonitor(9) Storage(10) PortControl(11) DuetExpansion(12) FilamentSensors(13) Display(15) SbcInterface(16) CAN(17) Expansion(18)

                        This will mean a serial terminal needs to be connected via USB, so as not to miss messages.

                        You can also enable logging to SD card with M929, eg M929 P"eventlog.txt" S3, turn off with M929 S0. This doesn't log debug messages that have been turned on with M111, though.

                        Ian

                        Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                        moth4017undefined 1 Reply Last reply Reply Quote 0
                        • moth4017undefined
                          moth4017 @droftarts
                          last edited by

                          @droftarts ive been running printer for 3 days now with the usb lead connected and not one disconnect ... typical

                          <

                          droftartsundefined 1 Reply Last reply Reply Quote 0
                          • droftartsundefined
                            droftarts administrators @moth4017
                            last edited by

                            @moth4017 I was doing that yesterday. As soon as I disconnected the serial terminal, DWC lost connection!

                            Ian

                            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                            moth4017undefined 1 Reply Last reply Reply Quote 0
                            • moth4017undefined
                              moth4017 @droftarts
                              last edited by moth4017

                              @droftarts i know this is a long shot and i carnt see any logic why the connection to the USB would make any difference, but only seems to disconect when the usb is not connected, unless its somehow suppling more power to the wifi module

                              <

                              oliofundefined 1 Reply Last reply Reply Quote 0
                              • oliofundefined
                                oliof @moth4017
                                last edited by

                                @moth4017 you can try to tape off the VIN pin on the USB cable to see if its really a back power issue https://community.octoprint.org/t/put-tape-on-the-5v-pin-why-and-how/13574

                                <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                                moth4017undefined 1 Reply Last reply Reply Quote 0
                                • moth4017undefined
                                  moth4017 @oliof
                                  last edited by moth4017

                                  @oliof ran printer for a couple of hours today with USB connected , no issue , will add tape to USB lead and try again

                                  that was a bit tricky to do 🙂

                                  <

                                  1 Reply Last reply Reply Quote 1
                                  • moth4017undefined
                                    moth4017
                                    last edited by moth4017

                                    ok DWC lost connection

                                    M122 === Diagnostics ===
RepRapFirmware for STM32F4 based Boards (biqoctopuspro_1.0) version 3.5.0-rc.2+101 (2023-12-19 16:32:23) running on STM32F4 (standalone mode)
Board ID: 32063-002JU-NJ38P-6T18S-HFUN7-70000
Used output buffers: 1 of 40 (40 max)
=== RTOS ===
Static ram: 19696
Dynamic ram: 90300 of which 20 recycled
Never used RAM 20028, free system stack 91 words
CCMRam static ram: 24276 dynamic ram: 34724 free ram 6532
Tasks: NETWORK(1,ready,16.8%,168) HEAT(3,nWait,0s 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters 3 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.3
Heater 1 is on, I-accum = 0.6
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "M122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0004007
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== Filament sensors ===
check 13820565 clear 32718022
Extruder 0 sensor: ok
=== CAN ===
Disabled
Longest wait 0ms for reply type 0, peak Tx sync delay 0 free buffers 0 (min 0), ts 0/0/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 668.81ms; fastest: 0.07ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0)
HTTP sessions: 2 of 8
Uploads/Errors: 4/0
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Bad header: 0/0
Firmware version 1.27-04S-D
MAC address 00:23:cd:20:84:e6
Module reset reason: Turned on by main processor, Vcc 3.39, flash size 4194304, free heap 37176
WiFi IP address 192.168.0.13
Signal strength -60dBm, channel 5, mode 802.11n, reconnections 0
Clock register 00004002
Socket states: 0 0 0 0 0 0 0 0
ok
Damon running
Debugging On
Fan & Heater Off
9564
5
Damon running
Debugging On
Fan & Heater Off
9574
5

                                    <

                                    gloomyandyundefined 2 Replies Last reply Reply Quote 0
                                    • gloomyandyundefined
                                      gloomyandy @moth4017
                                      last edited by

                                      @moth4017 I don't see any M111 output from the WiFi module...

                                      moth4017undefined 1 Reply Last reply Reply Quote 0
                                      • moth4017undefined
                                        moth4017 @gloomyandy
                                        last edited by

                                        @gloomyandy hopefully o SD card but im printing at the moment so cant stop, funny how it lost connection shortly after doing the tape on the USB lead

                                        <

                                        gloomyandyundefined 1 Reply Last reply Reply Quote 0
                                        • gloomyandyundefined
                                          gloomyandy @moth4017
                                          last edited by

                                          @moth4017 Also what exactly do you mean by "lost connection"? Does the connection get re-established? Are you connecting to the IP address or to the <board>.local dns name? If the connection does not get re-established can you ping the board when it is in this state, can you connect to it from a different device?

                                          moth4017undefined 1 Reply Last reply Reply Quote 0
                                          • gloomyandyundefined
                                            gloomyandy @moth4017
                                            last edited by

                                            @moth4017 The M111 output only goes to the USB terminal and you will only see it if you have the UART connection to the WiFi board in place.

                                            Chrissundefined moth4017undefined 2 Replies Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA