Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Software bundle 3.5.0rc.4 now available

    Scheduled Pinned Locked Moved
    Firmware installation
    16
    41
    1.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T3P3Tonyundefined
      T3P3Tony administrators @Exerqtor
      last edited by

      @Exerqtor thanks for the feedback!

      www.duet3d.com

      1 Reply Last reply Reply Quote 1
      • BlitzRegundefined
        BlitzReg
        last edited by

        3.5rc4
        I'm getting H1 Heater faults which I had no issues with my hypercube. I have to clear out the faults and then H1 heats up and I have no problems during print. The faults only happen when I try try to prewarm the bed and extruder. I ran M303 on both the bed and the extruder. No problem on the extruder but I do get a yellow warning on the bed. I even tried tuning at a lower temp and same thing on the bed. When I updated my firmware the wifi quit working and I had to use the terminal software with cable to get it working again. when I watch the graph during print the temps are staying in a straight line.

        gloomyandyundefined 1 Reply Last reply Reply Quote 0
        • gloomyandyundefined
          gloomyandy @BlitzReg
          last edited by

          @BlitzReg What version of RRF (and the WiFi firmware) did you have installed before this upgrade?

          1 Reply Last reply Reply Quote 0
          • CrazyCreatorundefined
            CrazyCreator
            last edited by CrazyCreator

            Today i try to Update my Board.

            But:
            Bildschirmfoto 2024-04-15 um 19.22.22.png

            Now i only can connect with ssh.
            No connect per LAN or WLAN possible.

            How can i restart the update prozess?

            On DWC i see this:
            Bildschirmfoto 2024-04-15 um 19.40.56.png

            http://www.crazycreatorcube.com

            chrishammundefined 1 Reply Last reply Reply Quote 0
            • chrishammundefined
              chrishamm administrators @CrazyCreator
              last edited by

              @CrazyCreator see here

              Duet software engineer

              CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
              • CrazyCreatorundefined
                CrazyCreator @chrishamm
                last edited by

                @chrishamm omg ... really? the hard way?

                http://www.crazycreatorcube.com

                chrishammundefined 1 Reply Last reply Reply Quote 0
                • chrishammundefined
                  chrishamm administrators @CrazyCreator
                  last edited by

                  @CrazyCreator I don't know why your update failed (DCS stopped in the background for some reason?) but yes, with an invalid firmware image you need to use bossa. It's already preinstalled on the SBC, too.

                  Duet software engineer

                  CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                  • CrazyCreatorundefined
                    CrazyCreator @chrishamm
                    last edited by CrazyCreator

                    @chrishamm
                    Unfortunately, I can't find how to flash the firmware from the Pi onto the board. Can access the Pi via VNC...

                    And next strange problem. In the Docu is writing:
                    Erase the firmware on the Duet by either:
                    Pressing the Erase button (next to the reset button on older Duets); or Jumpering the erase jumper
                    Remove the erase jumper once the Diag LED lights up.

                    But i can't find this Pins for jumper it.

                    Maybe this is the reason for this:

                    But what's much stranger is that when I connect the board to the USB on the PC, nothing happens.
                    Bildschirmfoto 2024-04-16 um 17.47.52.png
                    Neither on the Mac nor on the Windows PC... The board does not appear.
                    Do I have to disconnect all cables (Motor, Endstops, heater etc) beforehand and only the USB cable can be plugged in?
                    All other cables are of course without power, the main switch of the printer is turned off.
                    .

                    http://www.crazycreatorcube.com

                    droftartsundefined 1 Reply Last reply Reply Quote 0
                    • droftartsundefined
                      droftarts administrators @CrazyCreator
                      last edited by droftarts

                      @CrazyCreator I expect the firmware flash got part way through and failed. Using the erase jumper should get it back to a state where it will be recognised and firmware can be flashed via USB. This can be done from the Raspberry Pi, usually by sending the command:

                      ~/BOSSA/bin/bossac -e -w -v -b /opt/dsf/sd/firmware/Duet3Firmware_MB6HC.bin
                      

                      Erase jumper is here:

                      Screenshot 2024-04-16 at 19.02.46.png

                      Ian

                      Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                      CrazyCreatorundefined 1 Reply Last reply Reply Quote 1
                      • CrazyCreatorundefined
                        CrazyCreator @droftarts
                        last edited by

                        @droftarts Mhhhh ... Thanks all for the helping, but i don't have a erase jumper 😞

                        IMG_8500.jpeg

                        http://www.crazycreatorcube.com

                        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                        • jay_s_ukundefined
                          jay_s_uk @CrazyCreator
                          last edited by

                          @CrazyCreator looks like a cloned board. best ask Fysetc...

                          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                          CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                          • CrazyCreatorundefined
                            CrazyCreator @jay_s_uk
                            last edited by

                            @jay_s_uk The board came with the printer... No idea if it's a clone or not. But the clones are also made according to the specifications, aren't they?

                            http://www.crazycreatorcube.com

                            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                            • jay_s_ukundefined
                              jay_s_uk @CrazyCreator
                              last edited by

                              @CrazyCreator well its black, so its a clone.
                              And I know some Fysetc "clones" don't 100% match duet boards

                              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                              CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                              • CrazyCreatorundefined
                                CrazyCreator @jay_s_uk
                                last edited by CrazyCreator

                                @jay_s_uk
                                What kind of rubbish is that?
                                Well then I'll try to bridge the two pins.
                                If the board wears out, then at least an original one comes in 😉

                                btw
                                Here is a picture of a board from Filafarm (official seller in Germany), there is no erase jumper at this position. However, that is a 0.6 board in the picture.
                                Duet3_MB_6hc_v0.6-800x800_800x800.jpg

                                http://www.crazycreatorcube.com

                                infiniteloopundefined 1 Reply Last reply Reply Quote 1
                                • infiniteloopundefined
                                  infiniteloop @CrazyCreator
                                  last edited by

                                  @CrazyCreator

                                  Here is a picture of a board from Filafarm (official seller in Germany), there is no erase jumper at this position. However, that is a 0.6 board in the picture.

                                  Here you are:
                                  1713371136562-duet3_mb_6hc_v0.6-800x800_800x800.jpg

                                  CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                                  • CrazyCreatorundefined
                                    CrazyCreator @infiniteloop
                                    last edited by

                                    @infiniteloop

                                    I know... I saw that.
                                    I just wanted to show that there are also duet boards where the jumper is in a different place. So it's quite possible that this is the case on my board too.

                                    http://www.crazycreatorcube.com

                                    jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                    • jay_s_ukundefined
                                      jay_s_uk @CrazyCreator
                                      last edited by

                                      @CrazyCreator clones are based on the v1, not the 0.6

                                      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                      CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                                      • CrazyCreatorundefined
                                        CrazyCreator @jay_s_uk
                                        last edited by

                                        @jay_s_uk
                                        But ... My Erase Button is on Position from v0.6 and on the Board itself is writing v1.01 ... it's a little bit funnny 😉

                                        http://www.crazycreatorcube.com

                                        droftartsundefined 1 Reply Last reply Reply Quote 0
                                        • Phaedruxundefined
                                          Phaedrux Moderator
                                          last edited by

                                          3.5 is now released

                                          https://github.com/Duet3D/RepRapFirmware/releases/tag/3.5.0

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          1 Reply Last reply Reply Quote 1
                                          • Phaedruxundefined Phaedrux locked this topic
                                          • droftartsundefined
                                            droftarts administrators @CrazyCreator
                                            last edited by

                                            @CrazyCreator said in Software bundle 3.5.0rc.4 now available:

                                            But ... My Erase Button is on Position from v0.6 and on the Board itself is writing v1.01 ... it's a little bit funnny 😉

                                            Yup, it’s stuff like that that means we don’t support clones. And they don’t pay us to. Or make it easy for their customers to get support.

                                            Ian

                                            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA