Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Fly-SHT36 Max V3 RP2040 Based CAN-FD Toolboard

    Scheduled Pinned Locked Moved
    RepRapFirmware on other controllers
    3
    44
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CrazyCreatorundefined
      CrazyCreator @jay_s_uk
      last edited by

      @jay_s_uk
      I've now connected the SHT to my Mac and have a normal USB drive there... I simply copy the Duet3Firmware_SHT36MAX3.uf2 to it and that's it?

      Is it supposed to be that simple?

      http://www.crazycreatorcube.com

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @CrazyCreator
        last edited by

        @CrazyCreator that's it. Nice and simple

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
        • CrazyCreatorundefined
          CrazyCreator @jay_s_uk
          last edited by

          @jay_s_uk
          Wow... How cool is that?

          Two blue lights glow continuously, the bottom one flashes. I think that's how it's supposed to be.
          IMG_0705.png

          Ok... Then I'll connect it and get back to you when it comes to the entries in the config.g.

          http://www.crazycreatorcube.com

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @CrazyCreator
            last edited by

            @CrazyCreator that's correct. The light will flash fast until you connect to a mainboard. It'll then flash at the same speed as the mainboard

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            1 Reply Last reply Reply Quote 1
            • CrazyCreatorundefined
              CrazyCreator
              last edited by CrazyCreator

              @jay_s_uk
              Mmm... Actually, everything looks fine; the SHT is displayed in the CAN Manager.
              But M997 B124 reports an error.

              Bildschirmfoto 2025-03-27 um 22.25.06.png

              Bildschirmfoto 2025-03-27 um 22.25.21.png

              http://www.crazycreatorcube.com

              jay_s_ukundefined 1 Reply Last reply Reply Quote 0
              • jay_s_ukundefined
                jay_s_uk @CrazyCreator
                last edited by jay_s_uk

                @CrazyCreator if you've not loaded our firmware through DWC, M997 B124 will show an error.

                Looks like its working fine though. That's good news!

                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                • CrazyCreatorundefined
                  CrazyCreator @jay_s_uk
                  last edited by

                  @jay_s_uk
                  Ahhhh ... I have to upload the firmware that I previously loaded onto the USB drive again via dwc?

                  http://www.crazycreatorcube.com

                  jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @CrazyCreator
                    last edited by

                    @CrazyCreator no, theres no need to run M997 B124.
                    Next time you update, it'll do so automatically and it'll ask you to update.

                    M122 B124 will show you that all works well

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                    • CrazyCreatorundefined
                      CrazyCreator @jay_s_uk
                      last edited by

                      @jay_s_uk
                      You mean the update with terminal and sudo apt update && sudo apt dist-upgrade?

                      http://www.crazycreatorcube.com

                      CrazyCreatorundefined jay_s_ukundefined 2 Replies Last reply Reply Quote 0
                      • CrazyCreatorundefined
                        CrazyCreator @CrazyCreator
                        last edited by

                        @jay_s_uk

                        I think it looks good 🙂

                        Thank you
                        Bildschirmfoto 2025-03-27 um 22.42.27.png

                        http://www.crazycreatorcube.com

                        1 Reply Last reply Reply Quote 0
                        • jay_s_ukundefined
                          jay_s_uk @CrazyCreator
                          last edited by

                          @CrazyCreator ah, you use SBC mode. You'll have to manually upload the binary each time you want to update

                          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                          CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                          • CrazyCreatorundefined
                            CrazyCreator @jay_s_uk
                            last edited by CrazyCreator

                            @jay_s_uk
                            This means, whenever there is a RRF update I have to update manually with your Duet3Firmware_SHT36MAX3.uf2 downloaded from github and uploaded then via the DWC?

                            http://www.crazycreatorcube.com

                            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                            • jay_s_ukundefined
                              jay_s_uk @CrazyCreator
                              last edited by

                              @CrazyCreator correct

                              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                              CrazyCreatorundefined 2 Replies Last reply Reply Quote 0
                              • CrazyCreatorundefined
                                CrazyCreator @jay_s_uk
                                last edited by

                                @jay_s_uk
                                Many thanks for your support ... i think i write the next days for config the new z-probe-scanner 😄

                                http://www.crazycreatorcube.com

                                1 Reply Last reply Reply Quote 1
                                • CrazyCreatorundefined
                                  CrazyCreator @jay_s_uk
                                  last edited by

                                  @jay_s_uk
                                  So ... Now i have the first Question 😉

                                  ; TestFan - Zum testen des FAN Port's am Fly-SHT36 Max V3
                                  M950 F10 C"124.out13" Q500	; create fan 10 on pin gpio13 on Fly-SHT36 Max V3 Board and set its frequency
                                  M106 P10 C"TEST-Fan" H-1	; set fan 10 value. Thermostatic control is turned OFF
                                  

                                  I wrote this in my config.g, but without success.
                                  The FAN is connected to the GPIO13 FAN0
                                  Is a 24V Fan and the jumper is setting on the VCC

                                  http://www.crazycreatorcube.com

                                  jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                  • jay_s_ukundefined
                                    jay_s_uk @CrazyCreator
                                    last edited by

                                    @CrazyCreator thats incorrect naming
                                    the correct names to use can be found in this table here
                                    https://teamgloomy.github.io/fly_sht36_max_v3_pins.html#fly-sht36-max-v3-other-pins-in-firmware

                                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                    CrazyCreatorundefined 3 Replies Last reply Reply Quote 0
                                    • CrazyCreatorundefined
                                      CrazyCreator @jay_s_uk
                                      last edited by

                                      @jay_s_uk Why didn't I see the button? Thank you.

                                      http://www.crazycreatorcube.com

                                      1 Reply Last reply Reply Quote 0
                                      • CrazyCreatorundefined
                                        CrazyCreator @jay_s_uk
                                        last edited by CrazyCreator

                                        @jay_s_uk
                                        So the entry for my test fan now looks like this:

                                        M950 F10 C"124.out1" Q500 	
                                        M106 P10 S255				
                                        

                                        It also appears in the frontend, but when I increase it with the slider, nothing happens.
                                        but on SHT a blue LED lights up synchronously to control the slider
                                        I think I need to test my cables and plugs

                                        http://www.crazycreatorcube.com

                                        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                        • CrazyCreatorundefined
                                          CrazyCreator @jay_s_uk
                                          last edited by

                                          @jay_s_uk
                                          I've now checked all the cables and crimped a new one.

                                          But the fan remains silent.

                                          I've attached a picture with the perhaps silly question: Did I set the jumper for 24V correctly?
                                          There's 24V at the connector above, I measured it, and the fan is a 24V fan.

                                          IMG_0706.jpg

                                          http://www.crazycreatorcube.com

                                          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                          • jay_s_ukundefined
                                            jay_s_uk @CrazyCreator
                                            last edited by

                                            @CrazyCreator did you install the fan mosfet?

                                            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA