Print suddenly became longer in the Y Axis? **Solved**
-
@hobsie Belts with an aramid fiber or equivalent in are the best (like the gates ones) as they can handle the turn radius but also do not stretch (as some of the cheaper belts do.
P.S. glad you got it working!
-
@phaedrux : where did you find genuine gates belts online (at least an European source...)
-
@whosrdaddy well I should say "genuine" as I haven't seen them myself yet, but they are from an eBay vendor based in Hong Kong. The only reason I bothered was that several people on the DBot Facebook group vouch for them being legit.
-
Yeah saw those, don't know if they are genuine though.
The only genuine sources I found are all american.
For example this one:shipping cost from US is not cheap and minimum order is 50 feet
-
You can check here. http://www.sdp-si.com/index.php
I get my belts and pulleys from this place. Not sure how the shipping would be but there isn't any minimums on belt lengths.
-
@whosrdaddy Belts came today. I'm not sure if they are genuine, good fakes, or bad fakes, but they definitely look different than the usual black belts. I won't be able to actually test them out until next week unfortunately, but maybe from these pictures someone can tell me if they look legit or not.
-
Thanks for that, it surely looks like the real thing.
Keep us posted how they perform
-
@whosrdaddy Belts have been installed. They definitely feel different compared to the usual black belts. They are more flexible and don't spring back into shape as much. When pulling on the new belt by hand it doesn't feel like it gives as much stretch either. The tooth side has a brown color and the smooth side has a crackled appearance and texture. The fibres are all contained within the belt. I've had many cheap belts where the fibres are all coming loose out the sides of the belt. These ones have nice clean edges.
I've only done a single 6 hour print with them but so far the surface quality appears to be good.
-
Can you provide a link to the supplier please
-
@dougal1957 Sure. Here you go. I'm not affiliated with this seller in any way. I only heard about it through the DBot facebook group.
In my case shipping was less than 30 days and arrived via china mail air pack.
-
@phaedrux Thanks for the link Phaedrux. Just ordered some myself.
Judging from the images you've posted, even if they're "fake Gates" they look pretty good quality.
Also, an fyi for everyone/anyone - i've gone and edited the reprap wiki page on choosing belts to include a wee warning about steel core polyurethane belts and small pulley diameters for others to find.
Link here: https://reprap.org/wiki/Choosing_Belts_and_Pulleys
-
@hobsie so far the print quality with these belts has been phenomenal. If they are fake they are good ones. I think the biggest thing I noticed about them is that they are all cut very straight. The other belts seem to have a bit of wander. These are dead straight and they stay centered on the pulleys. They also sound quieter. I'm very pleased.
