Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    New beta firmware 2.01beta1/1.21.2beta1 available

    Scheduled Pinned Locked Moved
    Firmware installation
    14
    31
    4.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • gtj0undefined
      gtj0
      last edited by

      @dc42 were you able to reproduce/fix the issue I had with the Duex5 not being recognized after a reset?
      https://forum.duet3d.com/topic/5713/duet2-with-2-0-rtos-looses-duex5-on-reset

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @gtj0
        last edited by

        @gtj0 said in New beta firmware 2.01beta1/1.21.2beta1 available:

        @dc42 were you able to reproduce/fix the issue I had with the Duex5 not being recognized after a reset?
        https://forum.duet3d.com/topic/5713/duet2-with-2-0-rtos-looses-duex5-on-reset

        I didn't have time to try that, because I needed to get the beta released before I go on vacation. It's on my list to try.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • gtj0undefined
          gtj0
          last edited by

          Oddly enough, it seems to be working now. Anyway have a good holiday!

          gtj0undefined 1 Reply Last reply Reply Quote 0
          • timcurtis67undefined
            timcurtis67
            last edited by

            Updated and started printing last night with this new version. No issues at all so far.

            1 Reply Last reply Reply Quote 0
            • gtj0undefined
              gtj0 @gtj0
              last edited by

              @gtj0 said in New beta firmware 2.01beta1/1.21.2beta1 available:

              Oddly enough, it seems to be working now. Anyway have a good holiday!

              I spoke too soon, about the Duex5 not your holiday :). It seems I'm back to losing it after a reset.

              1 Reply Last reply Reply Quote 0
              • autschundefined
                autsch
                last edited by

                The Web Interface of this version is junk.
                Why publish an untested Version as beta? This is early alpha.

                dc42undefined 1 Reply Last reply Reply Quote 0
                • dc42undefined
                  dc42 administrators @autsch
                  last edited by

                  @autsch, please explain what problems you are having with the web interface. You can revert to Duet Web Control 1.21 or 1.21.1 if necessary.

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  autschundefined 2 Replies Last reply Reply Quote 0
                  • autschundefined
                    autsch @dc42
                    last edited by

                    @dc42, Java script error, if you save settings in the web interface.
                    I use windows 10, error was in Firefox developer.
                    Z moved in -Y.

                    1 Reply Last reply Reply Quote 0
                    • autschundefined
                      autsch @dc42
                      last edited by autsch

                      @dc42, if you want, I could install it this night and write down the errors.
                      John had the same problem with a Delta in Z axis
                      https://forum.duet3d.com/topic/5842/weird-z-behavior-with-first-attempt-with-rtos-firmware-on-delta/2
                      When I tried to open the js.gz, I got an error from Microsoft Scripting host:
                      0_1530203136541_dc42.PNG

                      Dougal1957undefined 1 Reply Last reply Reply Quote 0
                      • Dougal1957undefined
                        Dougal1957 @autsch
                        last edited by

                        @autsch Chris Hamm has released a new version of DWC which may have fixed this error see

                        autschundefined 1 Reply Last reply Reply Quote 2
                        • autschundefined
                          autsch @Dougal1957
                          last edited by autsch

                          @dougal1957 , Great!

                          Works now 😉

                          Thanks

                          1 Reply Last reply Reply Quote 0
                          • Barracuda72undefined
                            Barracuda72
                            last edited by

                            just installed the beta 2 today and the Script errors are gone if i want to add a new temp button

                            1 Reply Last reply Reply Quote 1
                            • c310undefined
                              c310
                              last edited by

                              hi! i did not find a link to b2 and now using b1 .
                              in webUI it shows

                              Error: Can't open 0:/sys/oem.json to read, error code 4

                              1 Reply Last reply Reply Quote 0
                              • resamundefined
                                resam
                                last edited by

                                There is no b2 - @Barracuda72 is this a typo?

                                @c310 the oem.json error is normal - only OEM vendors ship this file. "Normal" users can ignore the error.

                                1 Reply Last reply Reply Quote 0
                                • dc42undefined
                                  dc42 administrators
                                  last edited by

                                  There is a b2 of DWC 1.21.2, it's in chrishamm's github repo.

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • Barracuda72undefined
                                    Barracuda72
                                    last edited by

                                    As David stated...no typo 😉

                                    1 Reply Last reply Reply Quote 0
                                    • Iamturbo1978undefined
                                      Iamturbo1978
                                      last edited by

                                      Hello,

                                      I am getting an error that I know I am making happen. I currently have V2.0 and I tried to upgrade to 2.01. I downloaded "Duet2CombinedFirmware.bin, loaded it to my DuetWifi, try to update, and I get an error,
                                      'Error: M997: In-application programming binary "iap4e.bin not found'

                                      I know this has to be something I am missing, but I dont have any idea where to start looking to fix the problem. Hopefully someone can point me in the direction I need to go to fix this problem.

                                      Thanks
                                      TC

                                      dc42undefined 1 Reply Last reply Reply Quote 0
                                      • Phaedruxundefined
                                        Phaedrux Moderator
                                        last edited by

                                        Maybe try updating the IAP files again?

                                        Z-Bot CoreXY Build | Thingiverse Profile

                                        1 Reply Last reply Reply Quote 0
                                        • dc42undefined
                                          dc42 administrators @Iamturbo1978
                                          last edited by

                                          @iamturbo1978, download iap4e.bin from https://github.com/dc42/RepRapFirmware/releases/tag/2.0 and upload it through the Settings General page of DWC.

                                          Duet WiFi hardware designer and firmware engineer
                                          Please do not ask me for Duet support via PM or email, use the forum
                                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                                          Iamturbo1978undefined 1 Reply Last reply Reply Quote 0
                                          • Iamturbo1978undefined
                                            Iamturbo1978 @dc42
                                            last edited by

                                            @dc42, Wonderful. Thank you so much for the help.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA