RepRapFirmware 3.01-RC6 released

A Former User

@Dougal1957 you're trying, and succeeding; no-one gonna fault you for that.

chas2706

Just upgraded and having issues.
On the SBC display DWC reports that the sys drive is unmounted:

But in web browser DWC looks ok but nothing works when clicked:

Any ideas?

A Former User

@chas2706 said in RepRapFirmware 3.01-RC6 released:

On the SBC display DWC reports that the sys drive is unmounted:

see what ls -l /opt/dsf/sd says in a ssh shell?

chas2706

@bearer said in RepRapFirmware 3.01-RC6 released:

ls -l /opt/dsf/sd

I get this:

pi@Duet3:~ $ ls -l /opt/dsf/sd
total 20
drwxr-xr-x 4 pi pi 4096 Mar 6 17:13 filaments
drwxr-xr-x 2 pi pi 4096 Apr 3 11:45 firmware
drwxr-xr-x 3 pi pi 4096 Apr 3 13:56 gcodes
drwxr-xr-x 9 pi pi 4096 Mar 17 09:08 macros
drwxr-xr-x 5 pi pi 4096 Apr 3 13:48 sys
lrwxrwxrwx 1 pi pi 7 Oct 22 12:00 www -> ../dwc2
pi@Duet3:~ $

A Former User

@chas2706 said in RepRapFirmware 3.01-RC6 released:

drwxr-xr-x 5 pi pi 4096 Apr 3 13:48 sys

not sure if dcs is run as pi instead of root now, i'll leave that to someone else to confirm or correct.

Danal

Two errors, on a machine that started on RC4. It may be worth noting the machine was built from the Duet (full) image, and the instructions for moving to the unstable feed were followed via copy/paste. I'd be happy to report anything you guys need to see; the point of the above being it should be set up correctly.

Anyway, first error:

4/3/2020, 8:41:16 AM	M997
Error: M997: Failed to find IAP file /opt/dsf/sd/sys/Duet3iap_spi.bin

As suggested above, wget http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin -O opt/dsf/sd/sys/Duet3iap_spi.bin fixed this.

However, I then received:

4/3/2020, 8:42:46 AM	M997
Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet3Firmware.bin

I tried to fix this with a symlink, this did not work. ln -s Duet3Firmware_MB6HC.bin Duet3Firmware.bin

lrwxrwxrwx 1 pi   pi       23 Apr  3 08:58 Duet3Firmware.bin -> Duet3Firmware_MB6HC.bin

I then ran sudo apt install reprapfirmware --reinstall and this did work. Including updating the main board to RC6. The symlink was still in place; this may or may not have made a difference.

Expansion board updates worked, and report RC5.

4/3/2020, 9:12:59 AM	M115 B0
FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.01-RC6 ELECTRONICS: Duet 3 MB6HC v0.6 or 1.0 FIRMWARE_DATE: 2020-04-03b3
4/3/2020, 9:12:55 AM	M115 B2
Board EXP3HC firmware 3.01-RC5 (2020-03-29b1)
4/3/2020, 9:12:45 AM	M115 B1
Board EXP3HC firmware 3.01-RC5 (2020-03-29b1)

Board: Duet 3 MB6HC (MB6HC)
DSF Version: 1.3.0.0
Firmware: RepRapFirmware for Duet 3 MB6HC 3.01-RC6 (2020-04-03b3)
Duet Web Control 2.1.0

Danal

@bearer said in RepRapFirmware 3.01-RC6 released:

On the SBC display DWC reports that the sys drive is unmounted:

I had this for a few moments. An "emergency stop" restart fixed it, and/or a sudo service duetcontrolserver restart I'm not sure which.

chas2706

@Danal said in RepRapFirmware 3.01-RC6 released:

I had this for a few moments. An "emergency stop" restart fixed it.

My estop doesn't work either on DWC web page or SBC display.

Danal

Just remembered, it may have been a sudo service duetcontrolserver restart I'm not sure which really fixed it.

chas2706

@Danal said in RepRapFirmware 3.01-RC6 released:

sudo service duetcontrolserver restart

Just applied that and now I get this on SBC display:

Danal

It looks like something didn't upgrade, either the board or the DSF, and they won't connect. I'd try a power cycle first. Just to be sure everything that is there has an opportunity to connect.

If that does not work, then I'd start re-installing things, such as:

sudo apt install duetsoftwareframework --reinstall
sudo apt install reprapfirmware --reinstall

The full dependency list for DSF is:
duetsoftwareframework
Depends: duetcontrolserver
Depends: duetsd
Depends: duettools
Depends: duetwebserver
Depends: duetwebcontrol
Depends: reprapfirmware

Re-Installs can't really hurt anything; if it gets beyond that, it may take @DC42 or @chrishamm to advise how to fix.

chas2706

@Danal said in RepRapFirmware 3.01-RC6 released:

sudo apt install reprapfirmware --reinstall

I will try to re-install but not to worry if it fails because I have backup copies.

Thanks for your help.

jay_s_uk

My duet 3 + pi updated without issue

garyd9

@dc42 said in RepRapFirmware 3.01-RC6 released:

The release notes are at https://github.com/dc42/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
... If you were using M308 H or L parameters for thermistors attached to a Duet 3 main board, you will need to adjust those values
... The M308 thermistor H and L parameters on Duet 3 main boards have been re-scaled to match the scaling used on Duet 3 expansion and tool boards.

Can you please publish the old scaling in the release notes to make it easier to adjust M308 L/H values? Even better would be a simple equation that people can just plug their old values into to get the new values.

For example, I have the following M308 (with L/H values carried since using a duet2 on RRF 1.19):

M308 S0 P"temp0" Y"thermistor" A"Bed" T100000 B3950  R4700 L54 H-97

Thank you
Gary

Marco Bona

After updating my Duet Wifi I report three problems that I am having:
1_ I continue to have the problem with the correct visualization of the Layers (yesterday @droftarts said it would be solved with the new build)
2_When I load the filament from DWC I cannot see the list of saved filaments and it seems that the tool change is being performed.
3_After restarting the emergency button, the restart is not performed.

Marco Bona

Sorry but I was wrong to do something, after turning off and on now point 3 works correctly

garyd9

Updating only DWC to 2.1.0 on a duet3 (SD) with RRF-RC3 results in an inability to use DWC whatsoever. It appears that the DWC page keeps trying to refresh over and over, and the following shows up in the lower-right corner repeatedly:

@chrishamm

jay_s_uk

Bug

On a duet 2 running RRF3.01-RC6 and DWC 2.1.0 I am unable to retract or extrude filament manually using the buttons.
Even sending M302 P1 does not allow me to manually retract or extrude the filament.

T0 is active and up to temperature

dc42

@garyd9 said in RepRapFirmware 3.01-RC6 released:

@dc42 said in RepRapFirmware 3.01-RC6 released:

The release notes are at https://github.com/dc42/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
... If you were using M308 H or L parameters for thermistors attached to a Duet 3 main board, you will need to adjust those values
... The M308 thermistor H and L parameters on Duet 3 main boards have been re-scaled to match the scaling used on Duet 3 expansion and tool boards.

Can you please publish the old scaling in the release notes to make it easier to adjust M308 L/H values? Even better would be a simple equation that people can just plug their old values into to get the new values.

For example, I have the following M308 (with L/H values carried since using a duet2 on RRF 1.19):
M308 S0 P"temp0" Y"thermistor" A"Bed" T100000 B3950  R4700 L54 H-97
Thank you
Gary

For Duet 3 main board, dividing your old correction by 8 should give the new value.

Adrian52

@jay_s_uk +1