Mistake True bed levelling G32

[jay_s_uk]

@sgk you can also look at something like the klicky or unklicky

[A Former User]

@jay_s_uk
it's magnetized?

[jay_s_uk]

@sgk yes. klicky, unklicky and euclid all use magnets for attaching the bottom half of the probe

[A Former User]

@jay_s_uk it's too good this idea I imagine that it is necessary to program the printer and what to get the probe really quite complicated this part

[jay_s_uk]

@sgk the printer uses the probe as a standard switch.
there are example macros required for picking up and docking the probe so its fairly simple to implement

[A Former User]

@jay_s_uk ha but that's really what you're telling me, do you have any idea by chance where we could find it's macros?

[jay_s_uk]

@sgk the euclid ones are here https://euclidprobe.github.io/06_rrf3.html

[A Former User]

@jay_s_uk ok thanks

[jumpedwithbothfeet]

@sgk Here are my macro's for my Klicky probe it`s mounted on a Voron trident, but they are quite simple but will need to be adjusted to your printer but hopefully they help

homeall.g

; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool v2.1.8 on Mon Apr 06 2020 18:55:28 GMT+0100 (British Summer Time)
G91                     ; relative positioning
G1 H2 Z3 F6000          ; lift Z relative to current position
G1 H1 X400 Y400 F3000 ; move quickly to X and Y axis endstops and stop there (first pass)
G1 H1 X400 ; fast home x
G1 H1 Y400 ; fast home y
G1 X-5 Y-5 F600       ; go back a few mm
G1 H1 X10 ; fine home x
G1 H1 Y10 ; fine home y
G90                     ; absolute positioning

G1 Y310 F7000 ; Pick Up Klicky
G1 X42 F7000 ; Pick Up Klicky
G1 Y358 F7000 ; Pick Up Klicky
G1 Y310 F7000 ; Pick Up Klicky

G1 X180 Y180 F7000      ; go to first bed probe point and home Z
G30                     ; home Z by probing the bed

G1 Y310 F7000 ; Drop Klicky
G1 X42 F7000 ; Drop Klicky
G1 Y358 F7000 ; Drop Klicky
G1 X89 F7000 ; Drop Klicky

; Uncomment the following lines to lift Z after probing
G91                    ; relative positioning
G1 Z3 F100             ; lift Z relative to current position
G90                    ; absolute positioning

homez.g

; homez.g
; called to home the Z axis
;
; generated by RepRapFirmware Configuration Tool v2.1.8 on Mon Apr 06 2020 18:55:29 GMT+0100 (British Summer Time)
G91               ; relative positioning
G1 H2 Z5 F600    ; lift Z relative to current position
G90               ; absolute positioning
G1 Y310 F7000 ; Pick Up Klicky
G1 X42 F7000 ; Pick Up Klicky
G1 Y358 F7000 ; Pick Up Klicky
G1 Y310 F7000 ; Pick Up Klicky

G1 X180 Y180 F7000 ; go to first probe point
G30               ; home Z by probing the bed

G1 Y310 F7000 ; Drop Klicky
G1 X42 F7000 ; Drop Klicky
G1 Y358 F7000 ; Drop Klicky
G1 X89 F7000 ; Drop Klicky

; Uncomment the following lines to lift Z after probing
G91              ; relative positioning
G1 Z5 F100       ; lift Z relative to current position
G90              ; absolute positioning

bed.g

; bed.g
; called to perform automatic bed compensation via G32
;
; generated by RepRapFirmware Configuration Tool v2.1.8 on Mon Apr 06 2020 18:55:28 GMT+0100 (British Summer Time)
M561 ; clear any bed transform
;G29  ; probe the bed and enable compensation
;G28 ; home
G1 Y310 F7000 ; Pick Up Klicky
G1 X42 F7000 ; Pick Up Klicky
G1 Y358 F7000 ; Pick Up Klicky
G1 Y310 F7000 ; Pick Up Klicky
M401 ; deploy Z probe (omit if using bltouch)
G30 P0 X30 Y0 Z-99999 ; probe near a leadscrew, Front left leadscrew
G30 P1 X30 Y300 Z-99999 ; probe near a leadscrew, Rear left leadscrew
G30 P2 X330 Y0 Z-99999 ; probe near a leadscrew, Rear Right leadscrew
G30 P3 X330 Y300 Z-99999 S4 ; probe near a leadscrew and calibrate 4 motors
M402 ; retract probe (omit if using bltouch)                  
G1 Y310 F7000 ; Drop Klicky
G1 X42 F7000 ; Drop Klicky
G1 Y358 F7000 ; Drop Klicky
G1 X89 F7000 ; Drop Klicky

[A Former User]

@jumpedwithbothfeet
great thank you guys. it's possible that you make me a picture of your model to have an idea?

[jumpedwithbothfeet]

@sgk https://www.vorondesign.com/voron_trident my trident is no long standard it has 4 lead screws on the z axis even the klicky probe is not standard however the macro`s should give you an idea when you compare them to yours.

[A Former User]

@jumpedwithbothfeet
OK great I see every time you feel the bed she will look for the probe that's it?

[A Former User]

@sgk
the guy i ordered the probe more than receive it and install

[A Former User]

@sgk

[jumpedwithbothfeet]

@sgk the hot end assy moves to the klicky mount you can see on the rear left of the picture, it then picks up the klicky using the magnets, probes each part of the bed requested then goes back to the klicky mount and removes the probe, it is based on the Euclid probe and has worked flawlessly for me.

[A Former User]

I have to make a support in 3d right?

[jumpedwithbothfeet]

@sgk if your using the Klicky probe then yes just print the files supplied and assemble, I cant comment on the Euclid probe as I don’t know what is supplied.

https://github.com/jlas1/Klicky-Probe Link for Klicky files

[A Former User]

@jumpedwithbothfeet thanks