ExecOnMcode

[Falcounet]

@CrazyCreator I'm not still programming it for now but if you have improvement or feature requests, I can consider them.

[CrazyCreator]

That sounds good... will try it out in the next few days.

[CrazyCreator]

@Falcounet

Raspi 4 with bullseye

[Falcounet]

@CrazyCreator I think it's an issue with AppArmor. Do you use the DuetPi image for the SBC ?

[CrazyCreator]

@Falcounet
No ... i make all clean today
Raspi bullseye from raspi

[Falcounet]

@CrazyCreator Then try installing apparmor and try again

[CrazyCreator]

@Falcounet
I don't just have to install it. This AppArmor still needs to be configured.

Do you know what I have to do exactly? I'm not the Linux expert

[Falcounet]

@CrazyCreator DSF configure it for you. Config files are stored into /etc/apparmor.d/.
You should get /etc/apparmor.d/dsf.ExecOnMcode after the plugin installation.

Make sure you also have installed duetpluginservice

[CrazyCreator]

@Falcounet

I don't have this file.

But the install from the plugin is not complete, so i think the file is not created.

[CrazyCreator]

@Falcounet

in screen you see the pluginservice is running
apparmor freshly installed

[chrishamm]

@CrazyCreator I don't think this is an AppArmor issue, it's more likely that the permissions in your DWC directory are off for some reason. Try reinstalling duetwebcontrol and if that doesn't help, run sudo chown -R dsf.dsf /opt/dsf to fix the ownerships again. If that doesn't help, try to delete the file as root (sudo rm /opt/dsf/sd/www/js/...) and install the plugin once more.

[CrazyCreator]

@chrishamm
How can i reinstall or install DuetWebControl?
I don't find any tutorial

/Update
I upload this Zip-File: https://github.com/Duet3D/DuetWebControl/releases
and hope this is what you mean, with reinstall DuetWebControl?
i deleted all files with ExecOnMcode in name and try to reinstall the plugin

... But ... The same error

[Phaedrux]

Why not start with a DuetPi image?

[CrazyCreator]

@Phaedrux actual duetpi image missing python3.9, but TAMV need this.

[Phaedrux]

@CrazyCreator said in ExecOnMcode v0.1:

missing python3.9

https://itheo.tech/install-python-39-on-raspberry-pi

[CrazyCreator]

@Phaedrux
Maybe i try this, when @Falcounet & @chrishamm out of ideas

[chrishamm]

@CrazyCreator Did you try the chown command I posted above? If that doesn't resolve it, try to run sudo rm /opt/dsf/**/ExecOnMcode* and then reinstall the plugin. It's odd you're getting that "access denied" error.

PS: The stock DuetPi image comes with the python 3 package, run sudo apt install python if you're missing it.

[Falcounet]

@CrazyCreator Can you give me a link to the system image you installed ?
I might give it a try on my pi.

[Falcounet]

@CrazyCreator TAMV is like 3 years old. I don't think python 3.9 was out at this time.

[stuartofmt]

Jumping in here with a (possibly) relevant comment. If anyone intends to use Pi cameras: Consider using Debian Bullseye as the min base OS. There is a new library (from Pi) in Bullseye - so adopting this release will provide some future-proofing. It does not directly affect USB cameras but likely not a bad idea.