Triangle Labs hotend compatible to smart effector?
Hi, anyone tried this hotend from Triangle Labs?
Looks like it could be compatible to the smart effector.
@barracuda72 it does look like it would be compatible. It's an e3d clone though so performance may be variable
timothyz last edited by
Triamglelab's quality has been leagues ahead of other clones... Most of their products are outstanding (I haven't had anything where I felt the quality was less than I would expect from my genuine e3d products.
All in all, I'm to the point where I only buy from them if they offer the product over e3d. They even have a cloned BMG that looks like it might be a hair better than the official. (They use GF reinfored injection molded plastic for the housing).
Very impressed, they've taken the initiative to shift the narrative and produce quality products.
the prob is..you cant get the Smart effector hot end alone..from time to time i want to print PLA..now i use a titan full metal heatbreak..works flawless with Petg and everthing what need higher print temps...but with some PLA brands i´ve got probs. But 60€ for a complete 2nd effector unit is too much..so i just prep a 2nd hotend..with inliner for PLA
Dougal1957 last edited by
Thx for the link...unfortunatly only in the UK it seems...so..quite expensive..for less i´ll try the whole Hotend from Trianglelabs...will report if its a 100% fit
crynool last edited by
filastruder in the US carry it as well
elmoret last edited by
Don't delay, buy today.