Topics created by andres_13

@Phaedrux Yes, I already have the Duet wifi for a few years on a large format 3D printer with nema 17 and 23 motors, but unfortunately they lose steps due to lack of power, so I'm thinking of using servo motors with the duet wifi. I have not bought any servo yet and by the way I would like you to recommend some servo models that are compatible to do this installation.

You might find this calculator useful as well. https://forum.duet3d.com/topic/6853/maximum-acceleration-calculator

That would be a short between V_FAN (which you have set to VIN, so +12V or +24V) and +5V. That's blown the 3.3V regulator U2 and subjected multiple 3.3V components to excessive voltage. Sadly, the board is probably beyond economic repair.

@andres_13 @fcwilt

I highly recommend not putting your Duet onto the internet without using a VPN to protect it. It is not an "IOT" device and not designed to be exposed to the internet. Generally exposing Machine tools to the internet directly is not a good idea in my opinion!

If you want to access DWC remotely then setting up a secure remote desktop connection to a machine on your local network may be a better idea.