Topics created by Asabol

As you are unable to reach the board via the network connecting by USB terminal will be required. Please go through this guide and let us know what you find along the way for each step.

https://docs.duet3d.com/en/User_manual/Troubleshooting/Duet_wont_respond

@Phaedrux Ok thank you to both you and Aidar the printer works correctly know and it doesn't give me an error when I get up to 80°C.

@Asabol said in Fans don't turn on/work:

Hey thanks for all the help. Question do you have any recommendations for where I could buy a replacement 1 amp mini blade fuse? Considering it is kind of hard for me to find them locally.

Try eBay.

Sure if you'd like to do a write up that would be great.

There is currently a 5 part guide on adapting an Ender 3 Pro and a Duet Maestro, which is a little different to the Duet wifi.

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37

Not sure if you saw that yet or not. Some of the specifics won't match, but the commissioning and calibration steps are generally applicable.

I’m not entirely sure I pretty sure it has all the files considering I followed the dozuki of how to set up the board. I will just have to reupload the files I had on the sd card I used before getting the duet 2 WiFi board, which I had used for the print files.

Try different USB cables or a different PC entirely