Posts made by autsch

@infamous_panda
I dont care about speed
My next mods are Plexi Cover, 0.9 degree steppers, smart effector with mag balls, linear rails and a flexi drive direct Extruder.
I allready have the parts, but it takes time...

@rafb
Here my Duet Wifi files.
I had to cut the bridge on my BL touch for 3.3V.
https://www.thingiverse.com/thing:3052203/files

@infamous_panda
Monster works perfect with Duet Wifi.
If you want the config files, let me know.

@wilriker, if you have to crimp thousands of connectors, how I had in RocknRoll and Soundstudio business, Knipex is worth the money.
How many connectors do you have to crimp a day?

@wilriker why buy in germany, when they are manufactured in China?
It looks like you only want to talk about crimping
Here my recomendation Nr 2, price made in germany:
https://www.bauhaus.info/crimpzangen/knipex-crimp-hebelzange/p/11025709

The best for the price (a have it in orange and blue):

https://de.aliexpress.com/item/Crimpen-zangen-HS-03BC-8-backe-f-r-stecker-rohr-insuated-nicht-isolierende-crimpen-kappe-koaxialkabel/32893154249.html?spm=a2g0s.13010208.99999999.276.24853c00aaDUdm
I have the 190mm and 230mm Version.

@dc42 Thanks,
Now It makes sense, I din't care about the capacitive sensor yet.
But the smart effector is already here

Sorry for some stupid questions, I'm a newbee.
There is more to come...

@dougal1957 , Great!

Works now

Thanks

@dc42, if you want, I could install it this night and write down the errors.
John had the same problem with a Delta in Z axis
https://forum.duet3d.com/topic/5842/weird-z-behavior-with-first-attempt-with-rtos-firmware-on-delta/2
When I tried to open the js.gz, I got an error from Microsoft Scripting host:

@dc42, Java script error, if you save settings in the web interface.
I use windows 10, error was in Firefox developer.
Z moved in -Y.

Shit happens, John

Btw: New Version is out and working
https://github.com/chrishamm/DuetWebControl/blob/dev/DuetWebControl-1.21.2-b2.zip

The Web Interface of this version is junk.
Why publish an untested Version as beta? This is early alpha.

I had the same problem. Downgrade the web interface (www content) and it's working again. Problem is the Java Script in the Web Interface.

Thanks mloidl and peirof,
I will enter a positive value like peirof has, around 2mm.
G31 X0 Y0 Z-2.395 P25

But anyway, then the mesh grid manual is wrong and should be corrected:
"Once you are satisfied with your trigger height result (should be between 0 and 1mm, depending on your printer), open your config.g file (this can be found in your DuetWebControl), find the G31 command and enter your trigger height as a negative value in the Z parameter (ex. G31 X0 Y0 Z-.43)"

@mloidl said in Question about trigger height BL-Touch:

Z2.0

Thanks mloidl, but it's still unclear for me.
In your case, (sorry for my english) the Z value would be the height of the BL touch above the nozzle.
But if the G31 Z value is the nozzle height, it should be negative.
Your answer is in the Delta Calibration manual as corrct, but in the mesh grid manual it's negative.

OK, I'm an old man and maybe I miss something

Hello, I have following question for my Tevo Delta printer:
In your docs under calibrating a delta printer I read
"When you have established what the trigger height is, set the Z parameter og the G31 command in config.g to that value."
In your docs under mesh bed calibration is
"find the G31 command and enter your trigger height as a negative value in the Z parameter (ex. G31 X0 Y0 Z-.43)".

Is the Z value now positive or negative in G31?

Thanks for the answer