Topics created by C6D

@c6d looking at the traces, your temperature trace isn't very stable, so even though it may not be moving, things will be expanding and contracting a bit which could cause an intermittent issue. Equally could be a connector/wiring as the current is turned on/off - looks like you get the spikes always on a temperature rise

@C6D see https://duet3d.dozuki.com/Wiki/Gcode#Section_M501_Read_stored_parameters and also M500 to store them. Emulates marlin and repeteirs eeprom function, sort of.

Btw, just realized there is a common enable signal for all the drivers if that makes a difference.