Topics created by ChunkyPanda

@droftarts

My mistake... I'm sorry for mixing up the firmware numbers. I thought I had the latest firmware on both boards but I don't. I updated the firmware on the 6HC and it's now working.

Thanks so much for your help!

@dc42 I'm adding some photos for posterity in case this works out and someone else wants to try it.

Diode from Digi-Key... Vishay V3P6L-M3/H

l2in.png

The "L2in" node is only available on the top side of the PCB. I lifted the plastic bar off the "OUT_0 Select V" connector to get access to VB_FUSED and wired up the diode. Then replaced the plastic bar.

IMG_3425.png

IMG_3431.png

@droftarts Thank you very much.

I will not attempt to write to the register and risk damaging the board. I try to see if I can find other solutions.

@OwenD Thank you so much! That's exactly what I was looking for.