Best posts made by Coffee

With most of the hardware kinks worked out, it's time to fine tune the printing. I figuered I'd start out with something kinda fun before doing all the XYZ blocks, Benchys, circles, towers and squares. So in appreciation of a really neat controller board:
https://vimeo.com/267332484
The video is 3X actual speed.

@jujudelta said in Fine editor for working with Duet boards:

Intel's Aedit running on MS-DOS was the best!
8" floppies, MCS-51 Dev system on wheels the size of a fridge.
And before that punched tape and cards!
You didn't run programs, you submitted them as a batch file overnight, to then find out you made a typo!
You "Younglings" are spoilt

Sneaking in a batch of cards to print KISS's logo a few dozen times to give to friends!

@Surgikill At least your cut is healing. LOL

Thanks guys for the beeps and tunes! My old Creatbot beeps and I was missing that on this new build.

@phaedrux "The Powered by" one? I had actually deleted all the files for the original but per your request I created another. It is not exactly as the first I'm sure, but should be close enough for the eyeball.
Here is the direct dl link form Dropbox:

https://www.dropbox.com/s/zgcy0y74gtyhdkq/pwrdbyd3d.stl?dl=1

If for some reason the dl or the stl does not work, let me know.

Cheers!

@dc42 I have my Duet WiFi up and running very well, but this tweaking of the coding is somewhat new to me. I would love to be able to go back to moving before/without homing. Can you tell me where in config.g and what syntax if any for me to enter the M564 H0 command? Thanks!
Nice Forum BTW Everyone here seems cool and helpful.

This is how I have done it in the past with a Duet board.

That can happen with an outdated or misconfigured web browser. Like IE 11 for example. I use Firefox to open the site and it runs the scripts perfectly.

NICELY DONE !!! I dig the red printed parts!!

My ideas and my design of what I feel to be the most simple, uncluttered/uncomplicated clean and unique take on the Ultimaker style gantry. I humbly submit, The CoffeeMaker Concept.

VIDEO here... https://vimeo.com/274398226

Without even a tiny bit of tweaking, the movement of this concept is ROCK SOLID!

A fun little test... Video here: (3x normal speed) https://vimeo.com/275442255

I have a ton of parts coming and will begin in earnest, next week, building this machine's bigger better brother with an expected buld volume of ~ 440 x 340 x 300.

BTW, things like below are what I really enjoy working up and printing. Art does not have to be precise, only well received by the eye and keeps stress levels down over things like a print being off by a half mil. on an axis.

Cheers and stay tuned!