Topics created by genioluiz7

@genioluiz7 did you try using M997 S1 to reinstall the WiFi firmware?

@Phaedrux
Z Seam Alignment: Sharpest corner
Flow: 100%
Results:
2628d779-ad25-4dc2-9655-0f0c23400490-image.png
cc0e71ab-272f-4c3d-803b-e188673ef968-image.png
34f56b03-f0da-4a5f-9989-a7e9ff31671f-image.png
a721dcae-4ec1-4167-9fb1-7a72a31985de-image.png

Z Seam Alignment: Random
Flow: 95%
Results:

645d19c8-f772-4458-8a57-774dc1143dff-image.png

bf215744-7585-428d-9af7-f73afc3a0421-image.png

Furthermore I saw that this component (in the following picture) is broke. Where can I buy it?
b3c7d219-3d09-4013-bef3-3dde0e261365-image.png

I think I've set every error in the configuration. Therefore I want to say thanks for your help. Very appreciated.

Now remain only another problem to set on my Chiron but I think it is no more about the configuration tool. So I will discuss it in another chat. See you soon.

@genioluiz7 said in Cannot upgrading firmware from 2.05.1 to 3.0 and 3.4.5:

My Chiron has two motors to lift the extruder, but only the left one is working, the other seems turned off.
So I think that I've to turn it on and next level the x-axis and synchronize the two z-motors (A and B) together.

Probably best to start a new thread for this problem. Include your config.g and how you have the motors connected.