Topics created by Harrynice

@T3P3Tony Hi, I did calculate them initially on the reprap configurator, but Y was slightly out of whack (possibly due to belt or build).

An adjustment of -10 steps per mm seems to have worked perfectly, though I admit I know far less about this stuff than almost everyone here 🙂

@Phaedrux Embarrassingly, I didnt realise that my previous M303 hadn't been stored, so the heaters weren't actually configured! 😊

Unfortunately, my cubes are printing with a backwards lean, so have raised another question to see if anyone can help.

The best thing is that this is all in preparation for transitioning from a prusa clone to a hypercube evolution, so I can imagine I will have a lot more questions to ask again once I start using the new build!

@Harrynice said in Heated bed - quick question:

Anyone have any recommendations for a good one?

There are many good discussions already if you search. Here's one: https://forum.duet3d.com/topic/8649/need-advice-on-new-heated-bed-aluminium-plate?_=1591561293520

@deckingman not to worry - managed to resolve the issue 😊

Amazing! It is now working again! Thank you so much for pointing this out - I could have sworn I did the upgrade to 3.0.0 first, but apparently not!

Looks like PEBKAC and issue now appears to be solved, so please accept a virtual beer from me :).