Best posts made by Heide

I do not know why, but it helped to instal new Firmware. I think there must have been somekind of corruption, I do not know. Maybe it is like what @droftarts said, it can be corrupted. What I know is that I had alot of restarts, alot of changing the code, alot of inspecting my wiring to see if there should be a problem there. Maybe the change of code and the restarts has done something to the Firmware. Anyway yesterday evening I had succes in getting the Z-axel touching the endstop and I am of cause very happy with that.
So for a small moment I will leave your experience a little, I hope. So you can use it else were

I would like to thank you all for your time. Thanks

@jay_s_uk

Then I have made it wrong. I am happy that it has not been powered on just yet. Thanks

@fcwilt Thanks, glad that I have a mesuring watch. It is dialed in 1 mm is actual 1 mm. Simpel equation, Nice

@fcwilt here it is

I still need some tweeking, but almost complete. I will make a new one tomorrow. I will adjust accoring to your explanation. Thanks

RepRapFirmware height map file v2 generated at 2022-04-04 20:58, min error -0.880, max error 2.263, mean 0.810, deviation 0.709
axis0,axis1,min0,max0,min1,max1,radius,spacing0,spacing1,num0,num1
X,Y,0.00,270.00,0.00,240.00,-1.00,20.00,20.00,14,13
      0,      0,      0,      0,      0,      0,      0,      0,      0,      0,      0,      0,      0,      0
      0,  2.263,  2.043,  1.743,  1.447,  1.213,  0.913,  0.627,  0.383,  0.125, -0.110, -0.465, -0.785, -0.880
      0,  2.207,  1.983,  1.760,  1.435,  1.195,  0.965,  0.688,  0.438,  0.215, -0.005, -0.305, -0.615, -0.757
      0,  2.155,  1.950,  1.703,  1.398,  1.205,  0.980,  0.735,  0.490,  0.260,  0.075, -0.235, -0.510, -0.667
      0,  2.078,  1.885,  1.642,  1.388,  1.160,  0.978,  0.765,  0.518,  0.323,  0.178, -0.145, -0.397, -0.525
      0,  1.983,  1.820,  1.628,  1.388,  1.205,  1.015,  0.785,  0.562,  0.390,  0.235, -0.027, -0.300, -0.428
      0,  1.945,  1.780,  1.553,  1.375,  1.215,  1.005,  0.825,  0.615,  0.420,  0.268, -0.027, -0.207, -0.342
      0,  1.855,  1.693,  1.540,  1.308,  1.148,  0.993,  0.843,  0.655,  0.500,  0.358,  0.103, -0.075, -0.182
      0,  1.767,  1.648,  1.470,  1.305,  1.148,  1.040,  0.892,  0.735,  0.582,  0.442,  0.255,  0.068, -0.055
      0,  1.668,  1.575,  1.443,  1.257,  1.160,  1.030,  0.895,  0.763,  0.625,  0.510,  0.345,  0.173,  0.058
      0,  1.580,  1.485,  1.355,  1.240,  1.130,  1.013,  0.885,  0.765,  0.648,  0.543,  0.405,  0.245,  0.175
      0,  1.513,  1.425,  1.320,  1.210,  1.105,  1.005,  0.898,  0.793,  0.690,  0.610,  0.490,  0.350,  0.295
      0,  1.425,  1.358,  1.263,  1.168,  1.092,  1.005,  0.910,  0.815,  0.730,  0.663,  0.567,  0.447,  0.408

@jay_s_uk by the way, thanks

@fcwilt I have now adjusted the config.g and it works. I stille need to level the bed by hand, but that must be later on.

Please mark it as solved and thank you very much for your help