Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
?
https://duet3d.dozuki.com/Wiki/Gcode#Section_M291_Display_message_and_optionally_wait_for_response
Might work?
undefined
@Jaw8850 said in HELP WITH HEIGHT MAP HAS SUBSTANTIAL Z OFFSET WARNING:
Now I can at least tweak the 4 adjustment screws 1 at a time as I run the Mesh to get it as close as possible.
Are you aware of the Manual Bed Leveling Assistant?
It allows you to adjust your leveling screws quickly and easily.
Frederick
I had a similar problem... turned out one of my z steppers was bad
Worked like a charm, put SD card into Computer, added folder "filaments" in root, placed back in Duet, and was able to add the filaments from the DWC and create load and unload macros! Thank you for your help Phaedrux!!!!!!!
@deckingman said in Controlling Electronics fan using thermistor connected to E2:
@jaw8850 Quick answer - yes you can that. Longer answer, that's very similar to what I do - take a look at this post that I made on my blog some time ago - it's a bit out of date because you no longer have to define dummy tools but you'll get the idea. https://somei3deas.wordpress.com/2017/04/18/stepper-motor-and-electronics-cooling/
Excellent, thank you! I'll definitely check that out.
