Hey, did you receive any response concerning the question if the Ananas-Stepper does support CAN-FD?
I am very interested in using them for a large format printer build with the Duet3.
I have solved the issue by installing the unstable version (DSF Version: 2.1.3) of Duet Software Framework on Raspberry Pi. and also reverting back to RC11
The guide links to the stable version of the DSF and latest version of the reprap firmware which, at least in my case is not compatible and will lead to the "DCS is unavailable" Error.
I have the same "DCS is unavailable" issue with my Duet 3 v1.0 and RPI 4.
Do I understand correctly that swapping wires 22 and 18 on the ribbon cable will fix this issue ?
I have installed the lastest DuetPI version on my RPI and also reflashed my Duet3 with RRF 3 Release 3.01-RC12.
would it be possible to start a print from the SD-Card with a macro/script that ist called at the end of a print?
We can already uploade/delete Gcode-files on the SD even when a print is already running.
So basically we need a macro that starts the next G-Code file in the SD-folder until all prints are finished.
I have build a belt printer and this is a feature that would realy unlock the full potential of this kind of printer.