@devleon

Thank You !

Hi all

How du I tell DUET WIFI that my probe is placed -40 mm in X from my nozzle?

/Michael

@dc42
I have posted the picture in my other thread.

@dc42

Yes, here is a photo.

Yesterday I received the Duet 2 WIFI and PanelDue 7i from E3D.

The green channel on 7i is not working, there is a crack on the ribbon cable (from the driver to the panel).
If I push gently on the ribbon cable I some times get it to work but I can not see how I would have a chance til repair it myself.

E3D asked me to post it here so admin could confirm it.

Here is a picture of the PanelDue with a white copy paper behind.

Best Regards
Michael

EDIT: I found the forum: https://forum.duet3d.com/category/4/order-discussion

"Just recieved an email from E3D.
I need an Duet admin on this forum to confirm that the problem is the ribbon cable.

Do I have to make a new post some were specifik or maybe send an email to admin?"

I have found the problem, it is the ribbon cable that is broken (cracked).
I will return it.

Again, thank you for your help.

@aidar

Okay, I have placed a piece of white copy paper behind the display to give some kind of 'whitebalance'.

It worked !!

Thank You, you have saved my day

One last question, the background color is allmost purple (not white) is that normal?

@aidar

It is shown as 'Bossa Program Port'