Topics created by R3shY

@norder

Probe Offsets are correct Margin about 15mm, because the limitations added by the printhead dimensions

It was the M parameter or better the P parameter i lack off, so many thanks
i suggested the M one are beginning at zero.
at least i was excepting a gap at end like 270/10.

solved then

@dc42
@rogerpodacter

I see theres confusion about the examples, as i mentioned this just examples (picked from the duet doku)
I can now share acutal accelerometer records.
Printer Type: CoreXY

Record no shaping:
IS_1.png

Based on what i learned here MZV should suits best in relation to curves
IS_2.png
No Shape with MZV curve:
IS_3.png
Shaped with MZV
IS_4.png
it looks for me pretty well shaped, except a bit the area arround 58Hz-78Hz
So my question that is now remain after i understand most of the whole thing (i guess so, if not correct me in my statements)
Is there any tweaking point on this?

After experimenting a bit i tried modified ZVDDD, if im right this one is lacking because it have a longer frequenzy and give me
almost the same result as MZV?
IS_5.png

excuse me again for not beeing clearly enough that i used examples

Edit: Is the MZV Shaper is automatically right on 40Hz, because its the highest peak and the first curve of the shaper, shapes this peak best?