Topics created by sbNielsen

@droftarts said in Parsing error when loading height map:

@sbNielsen

axis0,axis1,min0,max0,min1,max1,radius,spacing0,spacing1,num0,num1 X,Y,0.00,17000.00,0.00,9000.00,-1.00,100.00,100.00,18,10

You have changed the axis length from 1700mm to 17000mm, and 900mm to 9000mm?! Also, you only have 17 points for each line of the probe data; you need 18 to go to from 0 (the first point) to 1700 (the 18th and last point) in 100mm steps.

Ian

Damn it, I change things to quick and then I fuck it up, sorry!

It works now! The main issues was the missing 18th column in the grid..

I feel stupid and happy haha, thank you for your help and patience!

To anybody reading this in the future, here is the .csv file that ended up working:

RepRapFirmware height map file v2 axis0,axis1,min0,max0,min1,max1,radius,spacing0,spacing1,num0,num1 X,Y,0.00,1700.00,0.00,900.00,-1.00,100.00,100.00,18,10 0.600, 0.500, 0.400, 0.400, 0.400, 0.400, 0.400, 0.300, 0.300, 0.400, 0.400, 0.500, 0.500, 0.600, 0.700, 0.900, 1.100, 1.100 0.400, 0.400, 0.300, 0.300, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.300, 0.350, 0.450, 0.500, 0.700, 0.800, 1.050, 1.050 0.300, 0.200, 0.200, 0.100, 0.100, 0.100, 0.050, 0.000, 0.000, 0.000, 0.100, 0.200, 0.300, 0.450, 0.600, 0.800, 1.000, 1.000 0.200, 0.100, 0.000, -0.100, -0.100, -0.100, -0.150, -0.200, -0.200, -0.200, -0.100, -0.100, 0.150, 0.280, 0.450, 0.680, 0.900, 0.900 0.100, 0.000, -0.100, -0.200, -0.200, -0.300, -0.300, -0.300, -0.220, -0.220, -0.180, -0.050, 0.020, 0.180, 0.400, 0.600, 0.900, 0.900 0.100, 0.000, -0.100, -0.200, -0.300, -0.400, -0.400, -0.400, -0.300, -0.300, -0.200, -0.150, -0.100, 0.000, 0.280, 0.500, 0.800, 0.800 0.100, 0.000, -0.150, -0.280, -0.400, -0.450, -0.400, -0.400, -0.200, -0.250, -0.200, -0.200, -0.050, 0.160, 0.400, 0.700, 0.700, 0.700 0.180, -0.050, -0.200, -0.300, -0.400, -0.400, -0.400, -0.400, -0.400, -0.350, -0.300, -0.250, -0.150, 0.050, 0.300, 0.600, 0.900, 0.900 0.100, -0.100, -0.200, -0.300, -0.400, -0.400, -0.400, -0.400, -0.380, -0.350, -0.280, -0.200, -0.200, 0.080, 0.250, 0.600, 0.900, 0.900 0.100, -0.100, -0.280, -0.380, -0.400, -0.440, -0.400, -0.400, -0.380, -0.350, -0.300, -0.280, -0.200, 0.000, 0.200, 0.550, 0.900, 0.900

Outside of making a custom version of DWC to remove controls that you do not want accessible you could look into some third-party browser extensions that allows you to hide controls would be useful.

https://chromewebstore.google.com/detail/hide-that/kjheknompfelomdgfloikfbnjmaiflfe
https://chromewebstore.google.com/detail/click-to-remove-element/jcgpghgjhhahcefnfpbncdmhhddedhnk

If you use Chrome those may work for you.

@sbNielsen said in Big gantry printer: Lagging and stuttering when printing:

There is still a bit of vibration or resonance, but that might be due to the machine design.

You coud move the z-steppers to the bottom, next to the leadscrews and add a 1:1 closed belt system.
That way the big mass of the steppers has nearly no lever to cause trouble.

@droftarts
I just plugged the servo, and it works!

Thank you for the support!

@jay_s_uk
Oh really, it just came like that.
Haha thank you so much!

@sbNielsen I would go for one RCD on the mains input for protection as if it trips you now it's safe as the supply will be isolated, then use seperate circuit breakers for current protection, switches after theses, you may want to also fit an isolation switch for the mains supple .

@sbNielsen

Always glad to help when I can.

Frederick