Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
undefined
@Lachlan said in RepRapFirmware-Obico:
@Sindarius Ok, we have ordered a Raspberry. Do I link the camera to the raspberry or to the computer? Reply
@Sindarius Ok, we have ordered a Raspberry. Do I link the camera to the raspberry or to the computer?
Reply
You would put the camera on the raspberry pi since that is where it would be doing the processing.
@sindarius Thats nice and handy!
@blt3dp while I do not have a delta to test with I do try my best to make sure that deltas are supported just like in the G-Code Viewer.
No one has replied
@jay_s_uk said in Object Cancel Plugin 1.0:
@joeko which zip file are you use? Do you not get the prompts to install the plugin? Are you standalone or SBC?
hallo, i use this https://github.com/Sindarius/ObjectCancelPlugin/archive/refs/heads/main.zip from here https://github.com/Sindarius/ObjectCancelPlugin i found the link in the code button
i have read your answer and have looked for an other version and found this https://github.com/Sindarius/ObjectCancelPlugin/releases/download/1.0.0/ObjectCancelPlugin-3.3.zip and with this i was able to install 🙂 thx for your answer
Perfect that's all I needed to know. I'll have to get some limit switches installed.
Thank you @dc42
@sindarius said in 3D GCode Viewer integrated with DWC:
I’ll need to look i believe the code currently uses the machine position and not the tool position which could be the issue.
@sindarius Did you have a chance to look into this?
I was working on someone else's E3D tool-changer today and experienced the same thing, so I wanted to check in.
DWC & Firmware Version: 3.3
