Posts made by tia79

@t3p3tony I get that. But the resellers refuse to even order something for you even if it takes 4 months. Thats what irritates me about the reseller program. Not that duet is far behind due to covid19.

I would like to come with constructive criticism in regards to duet reseller program.

In Norway for example we have 2 different resellers and they do not have anything in stock. Whats the point with resellers if their stock is out of stock constantly? If you ask them to order something for you, they say no.

Is duet ok with this? To me it seems like a useless thing to have if you have to order from other countries when your country has 2 resellers.

@Phaedrux From reprappro.me 7th July 2020

@Phaedrux Oh those are just from the print (duet holder). It looks like its on the card but they are mid air And i blew the duet clean, still the same issue.

@Phaedrux Dirt and debris? You sound like i used the card while i was making mudcakes

@droftarts I tried to reformat the sd card but no luck. its still the "Your duet rejected the HTTP request".

I give up trying to fix this.

SD card socket pic: https://cdn.discordapp.com/attachments/549857567342592002/821769534707990558/20210317_154424.jpg

@droftarts It is the original Duet sd card. I got the page up again but its giving me "Your Duet rejected the HTTP request: page not found
Check that the SD card is mounted and has the correct files in its /www folder" even tho the content on the card is correct.

@Veti https://cdn.discordapp.com/attachments/549857567342592002/821709016430018610/Screenshot_3.png

@Veti Only those that comes with Anycubic Predator and Chiron.

@Veti Gotta go buy one then, i don't have this small cards. But i will try in a few days and let you know.

@droftarts No it doesn't.

It doesn't even connect to my wifi. I installed the Web Interfacing matching the firmware but now it doesn't even connect to wifi.

@droftarts

I decompressed the sd_content zip onto the sd card.

https://cdn.discordapp.com/attachments/549857567342592002/821667844776919080/Screenshot_1.png

https://cdn.discordapp.com/attachments/549857567342592002/821667845926682644/Screenshot_2.png

https://cdn.discordapp.com/attachments/549857567342592002/821667848749056000/Screenshot_30.png

@droftarts Cool that did it!

However i get the message on the page now "Your Duet rejected the HTTP request: page not found
Check that the SD card is mounted and has the correct files in its /www folder"

The SD card contains the same files as described on https://duet3d.dozuki.com/Wiki/SD_Card

I read from another post on the forum that this is a firmware mismatch error but theres no info on how to fix that.

Hi!

Its taken me a 4 months and i can say i have finally installed my first duet2 wifi on an Anycubic Predator. What a stressful project this has been for someone not at all good at wiring, but ive managed well and i will probably upgrade my other printers! It was fun and a learning curve with alot of research. However. I have some problems.

After i did a M587 my interface page did not load, i tried to reinstall everything on the sd card and it still does not work. I also tried to redo the M587 and it failed. I also tried M997 to load the WifiServer.bin but no luck there either and then i saw another post and i tried M21 and it didn't load the sd card. So how do i fix this? In advance thank you for replies.

And for those asking if this is a original duet, heres the box https://cdn.discordapp.com/attachments/466162216903901205/820637152508641300/20210314_133823.jpg

M587 S"AndroidAPF018_RPT" P"***"

SENDING:M587 S"AndroidAPF018_RPT" P"***"

M587: Failed to add SSID to remembered list

ok B:2000.0 /0.0

M997 S1

SENDING:M997 S1

M997: File DuetWiFiServer.bin not found

SENDING:M21

M21: Cannot initialise SD card 0: Card is unusable

SENDING:M115

FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2