Topics created by wijkhuisen

Different steppers, different voltage, different noise.

You can check this wiki article and see if there are some things you can play with to improve it. There is no simple fix.

https://duet3d.dozuki.com/Wiki/Tuning_Stepper_Motor_Drivers

@Phaedrux 🙂
Thanks dude .

@wijkhuisen said in Duet wifi 2 x and y axxis wrong way:

G31 P500 X0 Y0 Z2 ; set Z probe trigger value, offset and trigger height

x y offset is missing

M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp
M308 S1 P"e0temp" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin e0temp

B4138 is the default. find the correct beta value in the thermistor documentation