Topics created by zabana

@oliof As you said there is a peak at very low frequencies, don´t know if enough high as to be a problem but there it is. Also I tested with and without a reinforcement in the X axis (I added a L shaped aluminum of 10x20mm all the wide axis lenght) and the peak around 40hz is now smaller but the VFA is more notorious in the printing, I will still try to dig some improvements at low speeds.

Here is the graph with the totally helpfull new Input shaping plugin:

Captura de pantalla 2022-04-07 12.02.26.png

@bberger thanks for the explanation! I will try it so I can see what gives better prints 😊

@donstauffer said in Vertical banding on COREXY machine:

@fcwilt I don't really have a theory. But I'm running out of moving parts to replace. So I'm frustrated and uncertain.

I can relate.

I got rid of three delta style printers because I could not get them to work as I wanted.

I did that after getting my first Cartesian which worked so much better.

Frederick

@joergs5 yep!

@deckingman in fact it was the bed because I was testing separately all element,endstops and axes after the firmware upgrade before to do any print. When the hotend was tested it worked as always and expected 😊

@deckingman Thanks a lot!
I´ll dig there to find info. I thought about the system like your second gantry but I don´t know anything about mapping alpha motors in the duet.

I need to finish first the mod for the printer and after I will try to find in your blog how to map motors.

I´ll take your word and will ask you if I stuck in the process ☺