Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Endstop switches doesnt work

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    7
    23
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • goodchrhereundefined
      goodchrhere @droftarts
      last edited by

      @droftarts i checked my wiring 3 times. i measured with a multimeter on the plug, and ih have signal or no signal, but the duet doesn't recognize the signal. i know that only work in x and y because my config.
      But x and y doesn't work.

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti
        last edited by

        @goodchrhere said in Endstop switches doesnt work:
        M574 X1 Y1 S1

        can you manually put this command in the console and try again?
        post the actual output of M119 before and after the closing the endstop

        goodchrhereundefined 1 Reply Last reply Reply Quote 0
        • goodchrhereundefined
          goodchrhere @Veti
          last edited by

          @veti i will do that today or tomorrow evening.

          1 Reply Last reply Reply Quote 0
          • themelleundefined
            themelle
            last edited by

            Looking at https://d17kynu4zpq5hy.cloudfront.net/igi/duet3d/4k56ZjaaAHrTJI6Z.huge
            ... where exactly did you plug in the two wires coming from the endstop switches?

            goodchrhereundefined A Former User? 2 Replies Last reply Reply Quote 2
            • goodchrhereundefined
              goodchrhere @themelle
              last edited by

              @themelle i did that, i checked the wiring 3 times.

              1 Reply Last reply Reply Quote 0
              • A Former User?
                A Former User @themelle
                last edited by

                @themelle said in Endstop switches doesnt work:

                Looking at https://d17kynu4zpq5hy.cloudfront.net/igi/duet3d/4k56ZjaaAHrTJI6Z.huge
                ... where exactly did you plug in the two wires coming from the endstop switches?

                This.. we need pictures of where the switches are plugged in to the switches and the duet. And dont take it that we are saying you are wrong we are only trying to help you, so for us to do that we need to see if there is anything wrong you might have missed.

                goodchrhereundefined 1 Reply Last reply Reply Quote 1
                • goodchrhereundefined
                  goodchrhere @A Former User
                  last edited by

                  @calvinx okay i will make photos today or tomorrow evening.
                  thanks for your help

                  1 Reply Last reply Reply Quote 0
                  • goodchrhereundefined
                    goodchrhere
                    last edited by

                    okay, i dont know, i had new wired and x and y works. i'm an idiot xD
                    What i have to chance in my config, to active z with the same switch?

                    themelleundefined 1 Reply Last reply Reply Quote 0
                    • themelleundefined
                      themelle @goodchrhere
                      last edited by themelle

                      @goodchrhere I'm glad you got it working!
                      To have Z axis behaving as X and Y you should just remove the lines

                      M574 Z1 S3 ; set endstops controlled by motor stall detection
                      
                      ; Z-Probe
                      M574 Z1 S2 ; set endstops controlled by probe
                      

                      from config.g

                      1 Reply Last reply Reply Quote 1
                      • goodchrhereundefined
                        goodchrhere
                        last edited by

                        I‘t works fine, thanks for your helps!

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA