• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

What CAD software you use?

Scheduled Pinned Locked Moved
3D Printing General Chat
18
58
4.2k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    arhi @zapta
    last edited by 6 Jul 2020, 18:20

    @zapta said in What CAD software you use?:

    @Phaedrux said in What CAD software you use?:

    I still use tinkercad for editing STL meshes.

    It's also a good starting point for kids.

    hm, I tried to edit a mesh in tinkercad 10+ times and never managed to do it.. something about it do not sit with me so I did not show it to my kids as I can't show them how to use it 😞

    I wonder how it compares to FreeCAD.

    Feature wise, try FreeCAD and decide for yourself, I was impressed today (not so earlier). Licence wise FreeCAD is open source 🙂

    undefined 1 Reply Last reply 6 Jul 2020, 18:22 Reply Quote 0
    • undefined
      Phaedrux Moderator @arhi
      last edited by 6 Jul 2020, 18:22

      @arhi said in What CAD software you use?:

      I can't show them how to use it

      Take the built in tutorial and make yourself a key chain. It's pretty easy.

      Z-Bot CoreXY Build | Thingiverse Profile

      1 Reply Last reply Reply Quote 0
      • undefined
        arhi @Phaedrux
        last edited by 6 Jul 2020, 18:29

        @Phaedrux said in What CAD software you use?:

        @arhi said in What CAD software you use?:

        I did purchase netfabb studio

        You mentioned an education licence for autodesk. If that's the case you probably already have access to current netfabb studio through that.

        Awesome, I found it, had to disable ABP and uBLOCK plugins to actually get it 🙂

        1 Reply Last reply Reply Quote 0
        • undefined
          bot @arhi
          last edited by bot 7 Jun 2020, 18:32 6 Jul 2020, 18:31

          @arhi said in What CAD software you use?:

          @Phaedrux said in What CAD software you use?:

          I don't mind paying for good software

          I don't mind paying for software that makes me money and I use a lot of very expensive tools for my work, but this is hobby and there I have limits. SolidWorks is 4000$ + 1300$ yearly, not something I can really approve for myself... I didn't have problem paying 150$ for s3d but you can't compare 150 vs 5300 for first year 🙂

          I did purchase netfabb studio (4.0 or 4.1 I Don't remember) that was rather expensive with a promise of good slicer... that was iirc 1000eur back in the day, too bad that app don't work on my computer any more 😞 ... since they as company do not longer exist no clue how to reenable that licence (I still have the usb dongle sitting somewhere) .. too bad as netfabb studio was very capable mesh handling tool 😞

          Lol, well, sorry to break it to you, but NetFabb was bought by Autodesk! Haha, man. They are ruining your life. 😞

          [edit: seems you already knew that 😛 ]

          They still sell it, at an exorbitant price, and it looks like they added some things and made it look nicer. If you ask nicely, they may grant you a license based on your old credentials.

          Many of the features of NetFabb are in Fusion. The FFF slicing, iirc, is not actually directly lifted from NetFabb, but many of the surrounding features are.

          MeshMixer and NetFabb both pop their heads up within Fusion.

          *not actually a robot

          undefined 1 Reply Last reply 6 Jul 2020, 18:36 Reply Quote 0
          • undefined
            arhi @bot
            last edited by 6 Jul 2020, 18:36

            @bot said in What CAD software you use?:

            Lol, well, sorry to break it to you, but NetFabb was bought by Autodesk! Haha, man. They are ruining your life. 😞

            I don't mind, to be fair the old 4.1 version had everything I need (except for slicer but thats not why I purchased it), if I could just get my 4.1 to work I'd be ok but the contacts I had in netfabb are not there any more and they made the whole thing with the dongle weird (they make you a special licence key that they send you via email and it then works with that dongle ?!?! so when I replaced the computer - puf, nothing works any more, nor a I can download the netfabb 4.1 any mroe 😞 )

            but installing premium 2020 now .. looks like this edu licence works ok 🙂

            (hm, just god "install error 0: the operation complete successfully !?!?!?!")

            Many of the features of NetFabb are in Fusion. The FFF slicing, iirc, is not actually directly lifted from NetFabb, but many of the surrounding features are.

            MeshMixer and NetFabb both pop their heads up within Fusion.

            Well the major stuff I used netfabb for was fixing meshes and booleans between meshes as it was apart from AOI the only tool that was doing it properly. Unfortunately these tasks in f360 don't work nearly as good as they did in netfabb 😞

            undefined 1 Reply Last reply 6 Jul 2020, 18:49 Reply Quote 1
            • undefined
              deckingman @arhi
              last edited by 6 Jul 2020, 18:49

              @arhi Until I got into 3D printing 5 or 6 years ago, I had never used any CAD software whatsoever. I taught myself enough OpenScad to get done what I need to do, but I've never found the time to teach myself anything else, apart from a brief flirtation with FreeCad which is completely alien to an old fart like me.

              Ian
              https://somei3deas.wordpress.com/
              https://www.youtube.com/@deckingman

              1 Reply Last reply Reply Quote 1
              • undefined
                fcwilt
                last edited by 6 Jul 2020, 19:41

                Hi,

                I use "Moment of Inspiration" because it works the way my mind does - if that makes any sense.

                Frederick

                Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                undefined 1 Reply Last reply 6 Jul 2020, 22:27 Reply Quote 1
                • undefined
                  Phaedrux Moderator @fcwilt
                  last edited by 6 Jul 2020, 22:27

                  @fcwilt said in What CAD software you use?:

                  Moment of Inspiration

                  That's an interesting one. I'd never seen that before.
                  http://moi3d.com/

                  Z-Bot CoreXY Build | Thingiverse Profile

                  undefined 1 Reply Last reply 7 Jul 2020, 00:15 Reply Quote 1
                  • undefined
                    fcwilt @Phaedrux
                    last edited by fcwilt 7 Jul 2020, 00:19 7 Jul 2020, 00:15

                    @Phaedrux said in What CAD software you use?:

                    @fcwilt said in What CAD software you use?:

                    Moment of Inspiration

                    That's an interesting one. I'd never seen that before.
                    http://moi3d.com/

                    I've tried many of them, both free and paid.

                    For whatever reason MOI was the most intuitive for me. It just seemed to make sense, things seemed "natural".

                    I suspect that is likely related to how my mind works and others may not like it at all.

                    Frederick

                    Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                    undefined 1 Reply Last reply 7 Jul 2020, 00:48 Reply Quote 1
                    • undefined
                      arhi @fcwilt
                      last edited by 7 Jul 2020, 00:48

                      @fcwilt I never even heard of it, and looks like I'm not the only one 🙂 .. that's why I created this topic as I'm sure some diamonds will pop up 🙂 ...

                      undefined 1 Reply Last reply 7 Jul 2020, 17:37 Reply Quote 1
                      • undefined
                        Kolbi
                        last edited by 7 Jul 2020, 01:16

                        First would be Solidworks, distant second would be Solid Edge, followed by f360 for when I have to stay in OSX.

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          whopping pochard @Phaedrux
                          last edited by 7 Jul 2020, 03:23

                          @Phaedrux said in What CAD software you use?:

                          It is annoying when the STL translation service is down and I can't export an STL, but that's pretty rare.

                          Unless I’m misunderstanding, right click component name in browser, “save as STL,” no cloud export required.

                          undefined 1 Reply Last reply 7 Jul 2020, 03:59 Reply Quote 0
                          • undefined
                            mrehorstdmd
                            last edited by mrehorstdmd 7 Jul 2020, 03:34 7 Jul 2020, 03:27

                            I used DesignSpark Mechanical for a few years before I switched to Fusion360. It's about as easy to learn and use a SketchUp, but much more powerful and doesn't turn out bad STL files that have to be repaired before they can be printed.

                            Solvespace is an interesting program...

                            I've made and printed a few small "artistic" pieces generated using Structure Synth. If you like Open SCAD you'll love structure synth! It's not for modeling real objects, but more of a mathematical sculpting tool that uses recursion.

                            https://drmrehorst.blogspot.com/

                            undefined 1 Reply Last reply 7 Jul 2020, 04:09 Reply Quote 2
                            • undefined
                              3DPMicro
                              last edited by 3DPMicro 7 Jul 2020, 03:28 7 Jul 2020, 03:27

                              The US based organization, EAA (Experimental Aircraft Association) offers a Solidworks license with its $40/year membership. If anyone tries it please report back on its restrictions, if any. I thought about joining and getting a license but with Catia (From Dasault Sytemes also the creators of Solidworks) at work and BobCad/Cam for hobby I'd just assume not jump on another learning curve.

                              Duet controlled Lathe, micro mill, 3d printer and 1992 Haas VF2 VMC

                              undefined 1 Reply Last reply 7 Jul 2020, 03:57 Reply Quote 0
                              • undefined
                                Kolbi @3DPMicro
                                last edited by 7 Jul 2020, 03:57

                                @3DPMicro It's the same as the other educational/military/gov deals - for one year and not for commercial use.

                                undefined 1 Reply Last reply 7 Jul 2020, 04:10 Reply Quote 0
                                • undefined
                                  Phaedrux Moderator @whopping pochard
                                  last edited by 7 Jul 2020, 03:59

                                  @whopping-pochard said in What CAD software you use?:

                                  @Phaedrux said in What CAD software you use?:

                                  It is annoying when the STL translation service is down and I can't export an STL, but that's pretty rare.

                                  Unless I’m misunderstanding, right click component name in browser, “save as STL,” no cloud export required.

                                  Maybe? https://www.reddit.com/r/3Dprinting/comments/9es1xt/getting_an_error_in_fusion_360_about_exporting_to/

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  undefined 1 Reply Last reply 7 Jul 2020, 04:06 Reply Quote 0
                                  • undefined
                                    mrehorstdmd @Phaedrux
                                    last edited by 7 Jul 2020, 04:06

                                    @Phaedrux Fusion360 does the STL conversion in the cloud. When they are updating their servers, usually on Sundays in the US, saving as STL usually doesn't work. When they finish server maintenance, STL conversion becomes functional again.

                                    https://drmrehorst.blogspot.com/

                                    undefined 1 Reply Last reply 7 Jul 2020, 14:41 Reply Quote 1
                                    • undefined
                                      Corexy @mrehorstdmd
                                      last edited by 7 Jul 2020, 04:09

                                      @mrehorstdmd said in What CAD software you use?:

                                      I used DesignSpark Mechanical for a few years before I switched to Fusion360. It's about as easy to learn and use a SketchUp, but much more powerful and doesn't turn out bad STL files that have to be repaired before they can be printed.

                                      Solvespace is an interesting program...

                                      I've made and printed a few small "artistic" pieces generated using Structure Synth. If you like Open SCAD you'll love structure synth! It's not for modeling real objects, but more of a mathematical sculpting tool that uses recursion.

                                      +1 for Design Spark mechanical.

                                      It's apparently a very slightly dumbed down version of an expensive program called "Spaceclaim", offered by RS as a tool to design things using their components (and therefore buy them).

                                      The only price of freedom is that you have to close the initial RS page on startup.

                                      I was advised of some custom stl export settings, and it does seem to do really "high poly" resolution in prints (if that's the right way to say it).

                                      I haven't seen a way to add text to a design with it though...is that possible?

                                      undefined 1 Reply Last reply 7 Jul 2020, 05:04 Reply Quote 0
                                      • undefined
                                        3DPMicro @Kolbi
                                        last edited by 7 Jul 2020, 04:10

                                        @Kolbi so one year and that's it? No renewal?

                                        Duet controlled Lathe, micro mill, 3d printer and 1992 Haas VF2 VMC

                                        undefined 1 Reply Last reply 7 Jul 2020, 04:34 Reply Quote 0
                                        • undefined
                                          Kolbi @3DPMicro
                                          last edited by Kolbi 7 Jul 2020, 04:36 7 Jul 2020, 04:34

                                          @3DPMicro Oh no, you can renew. It has to be done every year that you want to keep using it.
                                          Solid Edge is much better on this part, once you get it, it yours for ever-ish. https://solidedge.siemens.com/en/solutions/users/students/

                                          1 Reply Last reply Reply Quote 0
                                          17 out of 58
                                          • First post
                                            17/58
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA