DWC 3.1.1

[luca Massimiliano]

DA L ERRORE QUANDO ARRIVA SUL PIATTO ED ESTRAE LA SONDA HO UN BBLTouch

[Phaedrux]

Please post all your config files. config.g homeall.g homex.g homey.g homez.g homedelta.g bed.g deployprobe.g retractprobe.g

[luca Massimiliano]

@luca-Massimiliano

[Phaedrux]

Do you have a file called mesh.g in the system folder?

[luca Massimiliano]

@Phaedrux said in DWC 3.1.1:

no non ho la mesh.g G29 Esegui il file sys / mesh.g, o se quel file non viene trovato, esegui G29 S0 ho fatto cosi errore:
G29 S0
Error: Bad command: Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT+0100 (Ora standard dell’Europa centrale)...

ora confronto ifail detti da te config files. config.g homeall.g homex.g homey.g homez.g homedelta.g bed.g deployprobe.g retractprobe.g con i vecchi senza problema se non risolvo li posto ,

[luca Massimiliano]

@luca-Massimiliano said in DWC 3.1.1:

Error: Bad command: Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT+0100 (Ora standard dell’Europa centrale)...
RISOLTO
COME DICEVI TE NO ERA NASCOSTO NEL FILE DELOYPROBLE.G

[luca Massimiliano]

non penso sia correto,

[Phaedrux]

http://boim.com/DeltaUtil/CalDoc/Calibration.html

[luca Massimiliano]

VORREI USARE REPETIER HOST TRAMITE WIFI , NON SO COME FARE , MI PUOI INDIRIZZARE ?

[Phaedrux]

@luca-Massimiliano said in DWC 3.1.1:

I WOULD LIKE TO USE REPETIER HOST VIA WIFI, I DON'T KNOW HOW TO DO IT, CAN YOU ADDRESS ME?

I do not know how to use repetier host.

[luca Massimiliano]

COSA USI PER STAMPARE?

[Phaedrux]

I upload the sliced file directly from the slicer to the Duet over the network.

[droftarts]

@luca-Massimiliano You upload gcode files to the 'Jobs' screen in DWC, print from there!
See: https://duet3d.dozuki.com/Wiki/Duet_Web_Control_v2_and_v3_(DWC)_Manual#Section_Jobs

Ian

[luca Massimiliano]

@Phaedrux said in DWC 3.1.1:

I upload the sliced file directly from the slicer to the Duet over the network.

MI PERDO NELLA TERMINOLOGIA AFFETTAO ? SO CHE SI USA MA NON CAPISCO

[luca Massimiliano]

@droftarts STL OK?

[droftarts]

@luca-Massimiliano No. You need to 'slice' the stl first, with something like Cura or PrusaSlicer, to make a gcode file, then upload that. I think Repetier Server does this for you, but then it transfers the gcode to the Duet by USB (or Telnet over Ethernet/WiFi, which should be faster), as it's printing, which can cause pausing problems.

Most people prefer to have control over the slicing of the stl to gcode, so use a separate program to do this. Repetier Server takes away this control, to make it easier to use. Up to you.

Ian

[luca Massimiliano]

TI RINGRAZIO MA RIPRENDERO DOPO LA STAMPA DIRETTA

[luca Massimiliano]

IL MIO INIZIALE PROBLEMA PRIMA DI ADGIORNARE TUTTA LA MACCHINA COSA CHE SONO CONTENTISSIMO E RINGRAZIO TUTTI MA IN PARTICOLAR MODO PHAEDRUX PHAEDRUX. E' IL SEGUENTE , IL RISCALDATORE T1 NON VIENE RICONOSCIUTO REPETIER NE DA PRONTERFACE 

[luca Massimiliano]

This post is deleted!

[Phaedrux]

@leblond are you available for some italian translation?