No WiFi this morning !?

jay_s_uk

@tecno I get that restart error sometimes when submitting

latest RC
Make sure you right click in the area of the files, not on the tick box itself

tecno

This is what I get

jay_s_uk

@tecno you can't download directories as part of the zip. uncheck them and you should be good to go

tecno

Thank you very much Jay, much appreciated!

Phaedrux

WiFi firmware version 1.24beta2-05b1

Your wifi server version needs to be updated.

Place this bin file in your firmware folder and then boot up and send M997 S1 to re-flash the wifi module.

Then check M122 again it should show the wifi server version as 1.26.

tecno

Well here I am again with no connection with my Mini 5+ other that terminal connects but accepts no commands at all !

Urgent help needed how to proceed .

o_lampe

@tecno
You might need a USB hub to have enough power to feed the Duet? Just guessing...
What kind of commands did you try?

tecno

Power via printers PSU

M552 to check if WiFi is active or not

o_lampe

@tecno
Fair enough. What about M115 or M122? Just to see, if the SD-card has been read or not

tecno

In red, terminal response to what ever command is sent

Warning : x bytes not sent anymore

tecno

Anyone to help me?

jay_s_uk

@tecno sounds like you lost your config.g again?

tecno

Maybe, how do I get the board to respond?

jay_s_uk

check your sd card to see if config.g is there and what its contents is

tecno

LED's are lit
config.g is there and all looks familiar

jay_s_uk

@tecno send these over USB

M552 S0
M552 S1

let us know what the output is

tecno

As I wrote earlier this morning:

In red, terminal response to what ever command is sent

Warning : x bytes not sent anymore

jay_s_uk

@tecno no idea then. never seen that warning, especially not in red. all terminal programs I use are black and white

tecno

YAT

But.... now the bloody bord is working with another IP

How do I set fixed IP ??

jay_s_uk