Anybody wants a stepper motor analyzer?

Michael Hathaway

zapta

Hi everybody, 11 units went out today for the people listed below (one each). If you are in the US an dong' get it within 2 weeks or in Europe and don't get it within 3 weeks, please ping me.

You can reimburse me for the out of pocket expenses by sending me an amazon gift card for $39 (US) or $46 (Europe). To do that, log in to your amazon account, navigate to the gift cards section, purchase a gift cart for the applicable amount and send me the gift card # via IM here. If your give card will have a different amount due to exchange rate, should be also OK.

If you have any question, please let me know. If this batch will go well I will make more units. If you want to make unit yourself (even commercially and for profit), I will give you all the help I can for no free.

Edit: here is the list

@Tinken
@jay_s_uk
@martin7404
@bricor
@fcwilt
@alankilian
@Nuramori
@paralepsis
@3DPMicro
@Luke-sLaboratory
@dc42

fcwilt

@zapta

Listed below? Where???

Frederick

Nuramori

@zapta said in Anybody wants a stepper motor analyzer?:

Hi everybody, 11 units went out today for the people listed below (one each). If you are in the US an dong' get it within 2 weeks or in Europe and don't get it within 3 weeks, please ping me.

You can reimburse me for the out of pocket expenses by sending me an amazon gift card for $39 (US) or $46 (Europe). To do that, log in to your amazon account, navigate to the gift cards section, purchase a gift cart for the applicable amount and send me the gift card # via IM here. If your give card will have a different amount due to exchange rate, should be also OK.

If you have any question, please let me know. If this batch will go well I will make more units. If you want to make unit yourself (even commercially and for profit), I will give you all the help I can for no free.

PM sent with claim code. Thanks!

zapta

@fcwilt said in Anybody wants a stepper motor analyzer?:

Listed below? Where???

Oops, I just added the list to that post.

fcwilt

@zapta said in Anybody wants a stepper motor analyzer?:

You can reimburse me for the out of pocket expenses by sending me an amazon gift card for $39 (US) or $46 (Europe). To do that, log in to your amazon account, navigate to the gift cards section, purchase a gift cart for the applicable amount and send me the gift card # via IM here. If your give card will have a different amount due to exchange rate, should be also OK.

I went to Amazon and checked about gift cards.

They want an email address to deliver it or a phone number to text it.

How does that work?

They didn't mention anything about a gift card number that I could provide to you.

Thanks.

Frederick

paralepsis

@zapta Sent in chat! Thanks!

paralepsis

@fcwilt send it to yourself and grab the code.

fcwilt

@paralepsis said in Anybody wants a stepper motor analyzer?:

@fcwilt send it to yourself and grab the code.

If someone other than me used that code could that cause a problem?

I have not done this before.

Frederick

paralepsis

@fcwilt I'm assuming that the code is all that is needed, but maybe the thing to do is to wait for another answer?

Nuramori

@fcwilt Once you "make" an e-gift card, you can then email it to yourself. you get something like this:

All you need to do is copy the code after "Claim Code" and IM it to Zapta. It's a single use only code, and is redeemed by him.

alankilian

@zapta Gift card code sent via Chat.

Thanks a million for this.

zapta

Hi everybody, when you purchase the gift card, please purchase at amazon.com and not at at local amazon sites. I believe that any amazon account should be able to login to http://amazon.com.

Luke'sLaboratory

Got mine today, SUPER excited. Amazing Stuff!

Luke

alankilian

@zapta Beautiful!

fcwilt

@zapta

Mine arrived.

Thanks much.

The color of the case doesn't match my eyes but that's OK.

And I cannot find the manual. It wasn't in the box. You do have one don't you?

Seriously though, where do I go to read about using this little gem?

Thanks again.

Frederick

zapta

@fcwilt said in Anybody wants a stepper motor analyzer?:

And I cannot find the manual. It wasn't in the box. You do have one don't you?

@fcwilt, you can find documentation in this page https://github.com/zapta/simple_stepper_motor_analyzer . If anything is not clear, please let me know an I will update.

Basically you go from screen to screen using the right/left arrows. On the home page you will also see an icon that leads to the settings screen.

Some screens have additional features such as run/stop or scale (tap on the chart to toggle, there should be some visual indication such as text change if the tap changed anything). The trash can icon clears the data.

BTW, it got to Twitter Noticeable current degradation at high speed. https://twitter.com/LukesLaboratory/status/1410670399705202695

zapta

@fcwilt said in Anybody wants a stepper motor analyzer?:

The color of the case doesn't match my eyes but that's OK.

It's called Greenery, was the color of the year 2017.

https://www.pantone.com/articles/color-of-the-year/color-of-the-year-2017

I got it from Filacube, I like their filaments.

fcwilt

@zapta said in Anybody wants a stepper motor analyzer?:

I got it from Filacube, I like their filaments.

Never heard of them but will be checking them out.

Thanks.

Frederick

3DPMicro

Code is in our existing chat